News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Gauge/Speedometer rebuild restoration

Started by 2112, January 23, 2018, 11:12:18 AM

Previous topic - Next topic

2112

On the old site, several people had made recommendations for speedometer and gauge restoration.

I failed to write it down thinking I could always reference that information later.

Could we again get recommendations for this?

Thanks

KR Convertible


roddster

  Yes he does.  He can even take a 120 MPH speedo and turn it into the 140MPH for those building a clone (like me)...another lil'Red is on the way.

69 GT350 Vert

I used this place to restore my Faria console gauges with good results.

http://www.instrument-specialties.com/

sfm5s081

Palo Alto Speedometer

Speedometer Plus in Los Angeles, CA 310.838.7350

1175


Shelby_r_b

Steve Duke - HIGHLY recommend him. I just picked up my finished gauge cluster and accompanying dash panels, and door inserts.  Man, I didn't know original stuff could look so good! I'll post pics soon.

Here's his number:  +1 (469) 235-7240‬
Nothing beats a classic!

2112

Quote from: Shelby_0022 on March 12, 2018, 06:48:09 PM
Steve Duke - HIGHLY recommend him. I just picked up my finished gauge cluster and accompanying dash panels, and door inserts.  Man, I didn't know original stuff could look so good! I'll post pics soon.

Here's his number:  +1 (469) 235-7240‬

Did he also do the mechanicals? Is it to stock or upgraded for your project?

kingchief

SFM 6S406

Shelby_r_b

Quote from: 2112 on March 12, 2018, 08:33:49 PM
Quote from: Shelby_0022 on March 12, 2018, 06:48:09 PM
Steve Duke - HIGHLY recommend him. I just picked up my finished gauge cluster and accompanying dash panels, and door inserts.  Man, I didn't know original stuff could look so good! I'll post pics soon.

Here's his number:  +1 (469) 235-7240‬

Did he also do the mechanicals? Is it to stock or upgraded for your project?

Yes, he did all the mechanicals, refinished the chrome via the original vacuum process, polished my lenses, replaced the blue "bulb covers", all the seals, all the aluminum inlays, ohm'd my original harness - the works. He even fixed my clock! ;)

He did it all with all with my original parts; which allowed me to drive the car with the aftermarket dash in the meantime while the originalparts were getting refinished. Words can't describe how amazing it looks. My originals lens are crystal clear.

Again, I'll shoot some pics later.  But, know that he used all original parts (sans the aluminum inlays), and even got the door inlays from the same cut as the dash pieces, so they match 100% across the board.
Nothing beats a classic!

Shelby_r_b

One more note: if you replace the aluminum inlays, it's EXTREMELY important to get the same finish across the entire dash and door inlays. Not only can non matching stuff look bad, but it can get you points deducted during judging.

Just FYI.
Nothing beats a classic!

GT350Lad

6S373
6S1276