News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

67 GT350 #1210 up on Ebay (photos include an altered DSO "SVO" document)

Started by Richstang, October 30, 2018, 10:06:35 PM

Previous topic - Next topic

2112


67_1183

Quote from: 2112 on October 31, 2018, 10:11:09 PM
My Marti has a "Q".

As does mine, just not in the vehicle order image.
2nd owner of 67 GT500 #1183 since September 1976

2112


69mach351w

Quote from: 67_1183 on October 31, 2018, 09:38:29 PM
Quote from: 69mach351w on October 31, 2018, 09:21:09 PM
The Ford VIN is 7R02A158062.

The VIN is in plain sight right near the top left right under "Vehicle Order Image".

BTW, the "A" supposed to be a "K"  ::)



Don't think this is anything new or exciting.  All 67 350 are listed as A, All 67 500 are listed as S in the Marti vehicle order images of the few dozens of Marti reports I have seen.
Well, I just assumed that the 67 350 289's were "K" code cars like the 65-66.

Of course I've never owned a Shelby, so what do I know :o

Bob Gaines

Quote from: 69mach351w on November 02, 2018, 09:08:36 PM
Quote from: 67_1183 on October 31, 2018, 09:38:29 PM
Quote from: 69mach351w on October 31, 2018, 09:21:09 PM
The Ford VIN is 7R02A158062.

The VIN is in plain sight right near the top left right under "Vehicle Order Image".

BTW, the "A" supposed to be a "K"  ::)



Don't think this is anything new or exciting.  All 67 350 are listed as A, All 67 500 are listed as S in the Marti vehicle order images of the few dozens of Marti reports I have seen.
Well, I just assumed that the 67 350 289's were "K" code cars like the 65-66.

Of course I've never owned a Shelby, so what do I know :o
The A code is a anomaly and is rare. There are a few GT500's with a K engine code anomaly's also. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

1690

For $195,000 you would think it would have original valve covers on it.  When I see those obvious problems, I always wonder what else is incorrect and not pictured.

It sure does look great in that color.

C6ZZGT

"is currently registered in California with a California black plate and a 1967 sticker. "----Does CA have a YOM plate program ? Since it went to FL it would not have a CA plate.
6R07A143871,since 10/83
selling parts since 1981.

J_Speegle

We (the forum before the crash) had a fair lengthy discussion about this car as has been mentioned a little over 10 years ago. Remember the color discussion or should I way the explanation used by the last owner (before the current one I believe)  of why they choose the color they did.  Reviewed some pictures of the car a few weeks back and that is what made me recall the car and the thread.  Thought the car was still in Fresno at the time of the other thread.  Same pictures are being reused again as sometimes happens with sales.


Quote from: C6ZZGT on November 03, 2018, 12:51:22 AM
"is currently registered in California with a California black plate and a 1967 sticker. "----Does CA have a YOM plate program ? Since it went to FL it would not have a CA plate.

Over the years many owners have added Calif plates to their cars. Often then get the lettering sequences  wrong which makes it stand out or make some other choice that brings it into question. In recent years Calif has allowed owners, for an additional cost, to put black and gold plates on a car.
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

C6ZZGT

I was aware you could put a new black plate on but do they allow an original black plate to go on ?
6R07A143871,since 10/83
selling parts since 1981.

J_Speegle

Quote from: C6ZZGT on November 03, 2018, 11:20:40 PM
I was aware you could put a new black plate on but do they allow an original black plate to go on ?

As I understand there are ways to "return" black plates to a car.
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

557

You need both plates and they can't be assigned to another vehicle,you actually need to physically take the plates to the dmv so they can be re assigned to the vehicle...Had to do this with my original plates when my car dropped off the grid after years of sitting...

Richstang

This original SVO sheet for DSO 84-2572 was just emailed to me from a friend in CA. He found it on the Fast Lane website.

Notice there is no hand written gray car, but rather the correct typed in Candyapple Red car listed 1 unit.
There is also no hand written text "211F" in the upper area, instead the correct "201F" package is typed in for this DSO.


1967 Shelby Research Group 

www.1967ShelbyResearch.com
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

T-Bone68

Yikes...please no.  I don't know who they consigned, but they are offering to make it an Eleanor if that helps sell it.   Bolt in upgrades fine, but I hope no one takes their Eleanor offer.

https://sfbay.craigslist.org/eby/cto/d/clovis-1967-shelby/6799534906.html

"Considering a restomod?
Have you dreamed of an Eleanor or 1967 Shelby tribute with all the latest-greatest running gear & suspension? Imagine that car created from an authentic, Concours condition 1967 Shelby, rather than an old questionable Mustang shell? Bragging rights, intrinsic value, exclusivity, collectability, reliability, and performance all embed themselves in this best of both worlds restomod concept. We can simply upgrade our authentic 1967 Shelby Mustang with clean bolt in items such as a thundering 428 CI crate motor mounted to a 5-speed Tremec, along with independent suspension...whatever you envision your dream car to be, we can create."

2112

I doubt someone would build an Eleanor using a $195k starting point.

Or at least I hope not.

Bigfoot

RIP KIWI
RIP KIWI