News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Head Light Switch

Started by Fast Fords, November 07, 2018, 09:47:15 PM

Previous topic - Next topic

Fast Fords

My head light switch has started to let me down. After driving for a certain length of time with the lights on, they eventually turn off. I think this is caused from the switch heating up.

My question is, can I replace the '67 switch with that of a '69 Mustang head light switch ?  Is it a straight swap ?

Appreciate the help....Greg.

JD

Most of the '67 replacement switches can handle the extra lights.

(Yes the originals were not up to the task of the added lights - the grille lights are high-beams)
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

mjv458

a friend recommended using one from a 1967 Cougar.

1967 eight barrel

If you actually drive your vehicle there is a new plug and play relay that is easily hidden. No issue running halogen bulbs, they don't fluctuate and stay bright as a constant, even at idle. I bought them for my Shelby.
                                                                                                    -Keith

texas swede

I replaced the 12 Amp standard Mustang switch with an 18 Amp for a 69 Mustang on my 67 Shelby.
Don't remember if I had to transfer the old bracket over to the new one.
Texas Swede

Kent

Where can I buy the relay? Thanks Kent
SAAC Member from Germany and Owner of a unrestored 1967 Shelby GT500, 1968 1/2 Cobra Jet´s and some nice Mustang Fastback´s 67/68

Bob Gaines

The relay would be the last resort unless you added non factory high output lights. Just my opinion.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

1967 eight barrel

Quote from: Kent on November 14, 2018, 04:56:00 PM
Where can I buy the relay? Thanks Kent
This is a no-hack kit. I agree with Bob if you really don't drive your vehicle. They don't fluctuate at idle and you can run any hadlamp with it. Easy to hide as well.

https://www.rccinnovations.com/index.php?show=menu-hrk-all

GT500-0314

I had the flashing headlight problem. Put in a 67 Cougar headlight
switch, works well.

BGlover67

Quote from: 1967 eight barrel on November 15, 2018, 07:31:20 PM
Quote from: Kent on November 14, 2018, 04:56:00 PM
Where can I buy the relay? Thanks Kent
This is a no-hack kit. I agree with Bob if you really don't drive your vehicle. They don't fluctuate at idle and you can run any hadlamp with it. Easy to hide as well.

https://www.rccinnovations.com/index.php?show=menu-hrk-all

I don't mean to hijack this thread ( I love the idea of purchasing a kit to improve our crappy headlight systems), but how often does this statement pop up for you west coast folks?

CA residents Prop 65 Warning: Cancer and Reproductive Harm.
https://www.p65warnings.ca.gov/
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

1967 eight barrel

Quote from: BGlover67 on November 28, 2018, 05:43:30 PM
Quote from: 1967 eight barrel on November 15, 2018, 07:31:20 PM
Quote from: Kent on November 14, 2018, 04:56:00 PM
Where can I buy the relay? Thanks Kent
This is a no-hack kit. I agree with Bob if you really don't drive your vehicle. They don't fluctuate at idle and you can run any hadlamp with it. Easy to hide as well.

https://www.rccinnovations.com/index.php?show=menu-hrk-all

I don't mean to hijack this thread ( I love the idea of purchasing a kit to improve our crappy headlight systems), but how often does this statement pop up for you west coast folks?

CA residents Prop 65 Warning: Cancer and Reproductive Harm.
https://www.p65warnings.ca.gov/
Brian, It's on EVERYTHING that is sold in Commiefornia.  I noticed even all the gaskets I just bought from Felpro had the warning, as does the paint I use in modeling.

67350#1242

Does anyone have the part/eng number for the Cougar switch handy?
Thanks,  Kurt.
67 GT350  SJ 02/01/67  Gray 4spd A/C
67 Coupe  SJ 11/16/66  White Auto A/C PDB

Bob Gaines

Quote from: 67350#1242 on November 29, 2018, 08:30:23 AM
Does anyone have the part/eng number for the Cougar switch handy?
Thanks,  Kurt.
Check with Scott at West Coast Cougar.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

1967 eight barrel

Quote from: Bob Gaines on November 29, 2018, 12:19:50 PM
Quote from: 67350#1242 on November 29, 2018, 08:30:23 AM
Does anyone have the part/eng number for the Cougar switch handy?
Thanks,  Kurt.
Check with Scott at West Coast Cougar.
The new switches aren't an issue. You can just purchase a BWD ( Borg-Warner) switch works fine without having to modify a cougar switch.