News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

Center headlight bracket style

Started by Bob Gaines, November 21, 2018, 01:56:10 PM

Previous topic - Next topic

Bob Gaines

Who has the three hole and who has the two hole don't forget your Shelby VIN and Shelby completion date if known. Thanks.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Alan

Will check when we return fm SPI.
Max
'67    0029

Richstang

#0345 GT500 SJ completion 12/27/66 -SA completion 1/06/67 - extra hole on right side of car (Slanted grille)

Photo from "Dragon Wheels Restorations"
1967 Shelby Research Group 

www.1967ShelbyResearch.com
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

67_1183

2nd owner of 67 GT500 #1183 since September 1976

JD

#4
Note:
The first image the piece in question is one piece for both light buckets to attach to and has the 3 holes as well as the buckets are attached to the plate with self-tapping sheet metal screws and the wires have the sheathing.

The second image is two separate pieces each with one hole and the headlight buckets are attached to the plates with bolts and the wires are tape wrapped.

(Both of these seem to be posted up-side down, below they are rotated to match the image in the second post showing more of the car.  Also the second post with the green car shows a two-piece nose)

'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

greekz

#2339 has a 3-hole mounting, SA completion 5/23/67.


SFM 6S1134  '67 GT-350 #2339

Bossbill

01375; two hole; SAI Build Date 4/15/67
Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx

2112

#875 completed 4/6/'67 shipped 4/13/'67

2-hole version just like the 2-hole version pictured above.

KShane

#2213; 2 hole version, complete 5/12/67

67350#1242

#1242 - 2 hole style.   SA completion 3/15/67.
67 GT350  SJ 02/01/67  Gray 4spd A/C
67 Coupe  SJ 11/16/66  White Auto A/C PDB

Shelby_r_b

It's funny - I didn't even think as to whether or not early cars had this backing plate.  I went to look at #22 and didn't seen anything like what was pictures.  And, then I remembered...  ;D
Nothing beats a classic!

67gt500

#11
#486 - 3 hole - SA completion 1/31/67

BGlover67

Quote from: Shelby_0022 on November 27, 2018, 10:52:44 AM
It's funny - I didn't even think as to whether or not early cars had this backing plate.  I went to look at #22 and didn't seen anything like what was pictures.  And, then I remembered...  ;D

Ruben had an 'early brain fart'.  :)

But seriously, for anyone that has never seen the early configuration outside of a car, it will surprise you.  It really illustrates the hand made aspect of early 1967's.  I restored the original set off of no. 83, I was really amused how non-symmetrical they actually were.  The bushing on one side was 0.25 inches larger than the other side. Like a good friend once said to me, it looks like a drunk cubscout was making these cars back at LAX.  :o
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

owenkelley

#589 has the three hole design, but it looks almost like the bracket is kind of a combination of the two shown above. It does not have the bracket that goes all the way from one side to the other, the bracket looks more like the one on the two hole design. Don't know how common that is.....Shelby completion date - 01-11-67

rbarkley


#861 - 2 hole style.  SA completion 3/15/1967