News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Spark Plug wire issues

Started by mygt350, April 07, 2018, 08:24:43 AM

Previous topic - Next topic

mygt350

Son was moving a plug wire just a bit while engine was running and found out his wires do not keep the electricity inside the rubber insulation like he thought it should. Is it common to get that much of a jolt by simply toughing a plug wire at mid-point between dizzy cap and plug and getting crap slapped out of him? Are plug wires failing and possibly cross firing at times? Engine is really strong but does have run on after it gets hot. Engine is 351/392 with MSD dizzy. Not sure who made wires though.
Thoughts?
Thanks 
Continuous caretaker of 5S228 since May 1967

KR500

No you should not get your battery recharged! Time for some new wires.
Rodney
Rodney Harrold,Ohio SAAC Rep,SAAC 68 Shelby Concourse Judge,68 GT500KR 02267

mygt350

Will tell son to get a good set. Its a Superformance MKIII Cobra with a Windsor stroker. MSD box and MSD dizzy. Any suggestions for high end wire set?
Thanks
Martin
Continuous caretaker of 5S228 since May 1967