Author Topic: 1969 Mach 1 R code (428CJ) Project For Sale  (Read 853 times)

SFcarbuff

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
1969 Mach 1 R code (428CJ) Project For Sale
« on: May 20, 2019, 09:47:25 PM »
I have a 1969 project Mach1 up for sale.   It is a double R code car.  It was built in the San Jose plant and has been in California all its life.  The car is currently registered in my name in California.   There is no motor or trans with this project.  The car is apart and has been that way for some time.   The vin is also stamped on both sides near the shock towers.   The VIN plate on the dash is also there.   I have a new door tag created by Marti Auto works.  The Marti report is also attached.   The car is apart.

The original floors and trunk are solid.  Cowl and torque boxes solid. During the 70s flare was pop-rivet to the rear quarter panels.  However, underneath the uncut quarter panels are there.  There is a small amount of rust to the rear of the passenger side quarter and trunk area.  The original front engine inner fenders and radiator support are straight.  The front and rear suspension has been rebuilt a while ago.  The original 9-inch housing is still in the car.  The previous owner stated he may have changed the gear set from the 3:50 open but is not sure of the ratio.

The car comes with the following parts:  Original Ford shaker hood, 2 Ford fenders, headlight buckets with no broken tabs, front valance, lower grill valance, front bumper with brackets, cowl cover, non fold down rear seat, steering column, kick panels, big block frame motor mounts, big block shock tower to fire wall braces, original shock tower tops, big block heater fan shield, 4 head light cups with chrome rings with parts, AM radio, side scoops (2), front turn signal lights, grill hi-beam plastic trim rings, full set of stock seat belts, glove box and door, misc parts, A pillar interior trim, and a full set of Ford factory tinted windows per Marti report.  2 doors with used door panels. I may of missed something.

I can place all items on or in car for shipping.  Shipping is the responsibility of the buyer.  I will help on my end.

I can store the car until shipping is arranged.   Thanks for your interest.  I have pictures to sent so send me your e-mail address by PM and I will get them to you.

$17000/  will accept part trade for a running stock  65 or 66 mustang, 68, 69 Camareo or Hot rod
« Last Edit: June 10, 2019, 09:17:49 PM by SFcarbuff »

SFcarbuff

  • Jr. Member
  • **
  • Posts: 39
    • View Profile
Re: 1969 Mach 1 R code (428CJ) Project For Sale
« Reply #1 on: June 14, 2019, 10:30:58 PM »
Price lowered to 15500