Author Topic: 10 1/2 inch clutch plate original style 3 finger  (Read 1850 times)

acman63

  • Hero Member
  • *****
    • View Profile
    • Shelby Parts and Restoration  since 1977
10 1/2 inch clutch plate original style 3 finger
« on: July 31, 2019, 02:41:06 PM »
anyone have a good source for a stock 3 finger pressure plate?  10 1/2  inch.     seems like everyone is going to the diaphragm    McLeod is trying to make more  but im not holding my breath
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

mark p

  • SAAC Member
  • Hero Member
  • *
  • south NJ - Philly 'burbs
    • View Profile
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #1 on: July 31, 2019, 03:26:57 PM »
I was told last year that LuK has one?

Hope that you find what you need.
"I don't know what the world may need, but a V8 engine's a good start for me" (from Teen Angst by the band "Cracker")

66 Tiger / 65 Thunderbird

acman63

  • Hero Member
  • *****
    • View Profile
    • Shelby Parts and Restoration  since 1977
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #2 on: July 31, 2019, 05:32:31 PM »
if you have a number for LUK  Im all ears.  all im seeing is diaphragm
SAAC Concours Chairman

Owner Shelby Parts and Restoration Since 1977

SAAC original first year member

csxsfm

  • Full Member
  • ***
    • View Profile
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #3 on: July 31, 2019, 07:29:49 PM »
RAM Clutches has them.  Contact is Mike Norica.

mark p

  • SAAC Member
  • Hero Member
  • *
  • south NJ - Philly 'burbs
    • View Profile
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #4 on: July 31, 2019, 09:15:47 PM »
I was going by what someone "told me" in an email... but had decided to go diaphragm and stopped looking.
I had seen the RAM brand as well, but was not familiar with them.
Sorry for any confusion  :-[
"I don't know what the world may need, but a V8 engine's a good start for me" (from Teen Angst by the band "Cracker")

66 Tiger / 65 Thunderbird

gjz30075

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #5 on: August 01, 2019, 05:18:45 AM »
The Ram 88502 is 10.5" with a 1900 lb clamping force,  as told to me by a RAM specialist
https://www.summitracing.com/parts/ram-88502
Greg Z
6S2249

pbf777

  • Hero Member
  • *****
    • View Profile
Re: 10 1/2 inch clutch plate original style 3 finger
« Reply #6 on: August 01, 2019, 03:11:40 PM »
    Yes, the RAM #88502 @ approx. 1900 lbs., or the RAM #92502 @ approx. 2600 lbs.; and the HD or HDX suffix for different friction disc materials depending on requirements.

    We have been a dealer for RAM for several decades, and I believe one would find their product to be excellent.

     But do try to buy products for someone other than the big mail order houses, perhaps your local brick-and-mortar establishment who may at times be able to provide some competent guidance every once and a while, and be rewarded for their effort.

    Scott.