Author Topic: Shelby helmet  (Read 4739 times)

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Shelby helmet
« on: October 22, 2019, 03:34:58 PM »
Ok, I'm going to let out one of my hunting secrets here for you all.  I've been looking for another Shelby helmet for a while now, and I realized that they don't have any permanent markings on them telling everyone what they are.  When they were new, they only had a single Cobra sticker on the front, which was easily lost to time.  I figured that many of them might be sold off without the seller (or even the buyer) ever knowing it was an original Shelby helmet.  Inside they have a certification sticker saying it passed requirements set forth by Snell, and the large '1968' is obvious. 

The biggest give away are the vents on both side just below where your ears would be, and a stitched leather boarder all around.  I just picked this one up online.
At some point in history, it was repainted and goofy stickers were added.  But those ear vents just screamed 'Shelby', and when I compared the inside straps and number of snaps, it was apparent this was originally one of the Shelby helmets.   

Gotta love the "Ride beside me, be my friend" sticker.
« Last Edit: October 22, 2019, 03:36:46 PM by BGlover67 »
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Shelby helmet
« Reply #1 on: October 22, 2019, 06:02:36 PM »
Informative. Thank you for sharing .
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: Shelby helmet
« Reply #2 on: October 22, 2019, 06:53:23 PM »
Ooooooooo, ooooo...

I have questions...

First great find. Is it possible to restore these? Can they be taken apart?

Is it possible some of these helmets were not “Shelby” helmets? Ie., did Snell the company,  make a helmet that was shared with Shelby?


« Last Edit: October 22, 2019, 07:19:18 PM by Coralsnake »

KR500

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Shelby helmet
« Reply #3 on: October 22, 2019, 07:10:13 PM »
Snell is not a manufacturer but a helmet standards/certification foundation. Snell is to helmets as UL is to appliances. Their are multiple Snell standards/certifications depending on the helmets intended use, motorcycle, automobile, bicycle ect.
« Last Edit: October 22, 2019, 07:14:18 PM by KR500 »
Rodney Harrold,Ohio SAAC Rep,SAAC 68 Shelby Concourse Judge,68 GT500KR 02267

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: Shelby helmet
« Reply #4 on: October 22, 2019, 07:17:56 PM »
Oh, thanks, question revised above
« Last Edit: October 22, 2019, 07:19:42 PM by Coralsnake »

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Re: Shelby helmet
« Reply #5 on: October 22, 2019, 08:27:25 PM »
Ooooooooo, ooooo...

I have questions...

First great find. Is it possible to restore these? Can they be taken apart?

Is it possible some of these helmets were not “Shelby” helmets? Ie., did Snell the company,  make a helmet that was shared with Shelby?

Pete,

Although I've been told they were originally made by Buco for Shelby, I have never seen another helmet with the vents I pointed out.  I've looked at hundreds of helmets online, and this still seems to hold true.  I think it was specific to the model used for Shelby.  As for being restored, yes I believe the leather stitching can be removed.  The fiberglass certainly can be sanded and repainted.  Reproduction stickers are easily sourced. 
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby helmet
« Reply #6 on: October 22, 2019, 09:11:23 PM »
Very cool!  Thanks Brian.  :D
Nothing beats a classic!

csxsfm

  • Full Member
  • ***
    • View Profile
Re: Shelby helmet
« Reply #7 on: October 22, 2019, 09:22:59 PM »
The Snell Foundation issued their decals in registered sequential lots to qualifying helmet manufacturers.  Because of all the litigation around helmets, their record keeping was good.  They may still have in their archives the manufacturer ID based on the number on that Snell decal.  Or not.

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Re: Shelby helmet
« Reply #8 on: October 23, 2019, 07:24:01 AM »
Here is an ad from back in the day.   It mentions the 'unique' ear vents found only on this helmet.

« Last Edit: October 23, 2019, 07:27:41 AM by BGlover67 »
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Coralsnake

  • SAAC Member
  • Hero Member
  • *
  • The original Influencer
    • View Profile
    • theCoralsnake.com
Re: Shelby helmet
« Reply #9 on: October 23, 2019, 07:56:16 AM »
Awesome, now I want one

BGlover67

  • SAAC Member
  • Hero Member
  • *
  • Formerly "My Shelby Dream"
    • View Profile
Re: Shelby helmet
« Reply #10 on: October 24, 2019, 02:40:42 PM »
Received the helmet today, ironic what name is stenciled on the back (wrong sp of course).
« Last Edit: October 24, 2019, 02:44:36 PM by BGlover67 »
Thanks,
Brian R. Glover
SAAC Carolina's Northern Representative

Bill

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby helmet
« Reply #11 on: October 24, 2019, 02:51:18 PM »
Somewhere I have a picture of a white helmet being modeled by a SC SAAC member. I’ll see if I can dig it up  ;)
Instead of being part of the problem, be part of a successful solution.
HOW TO IDENTIFY A FORUM TROLL
https://www.saacforum.com/index.php?topic=16401.0

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby helmet
« Reply #12 on: October 24, 2019, 04:20:06 PM »
Received the helmet today, ironic what name is stenciled on the back (wrong sp of course).

That was the name of his sister.  ;D
Nothing beats a classic!

Special Ed

  • Hero Member
  • *****
    • View Profile
Re: Shelby helmet
« Reply #13 on: October 24, 2019, 06:49:56 PM »
I have an extra original silver helmet if someone wants it (don't really know what its worth). I bought them YEARS ago from a professional motorcycle racer who only bought it for the snell rating he had to have to race the class he was in and these were the only ones he could buy back in late 60s he told me. One he kept as a spare used very little and it was still in the Shelby box and had a Shelby plastic bag it was shipped in still laying in bottom of box. The other one steve j. got and it was used and worn but Shelby decal is still on it and I ended up buying it and $ 20.000 of other collectors items (including some of my stuff) back from the may mecum Steve j. estate auction.

Shelby_r_b

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Shelby helmet
« Reply #14 on: October 24, 2019, 06:58:37 PM »
I have an extra original silver helmet if someone wants it (don't really know what its worth). I bought them YEARS ago from a professional motorcycle racer who only bought it for the snell rating he had to have to race the class he was in and these were the only ones he could buy back in late 60s he told me. One he kept as a spare used very little and it was still in the Shelby box and had a Shelby plastic bag it was shipped in still laying in bottom of box. The other one steve j. got and it was used and worn but Shelby decal is still on it and I ended up buying it and $ 20.000 of other collectors items (including some of my stuff) back from the may mecum Steve j. estate auction.

PM sent. Thanks Ed!
Nothing beats a classic!