Author Topic: Where do these go? Windshield trim convertible  (Read 1892 times)

Rukiddin

  • Sr. Member
  • ****
    • View Profile
Where do these go? Windshield trim convertible
« on: December 05, 2019, 01:39:17 PM »
I reinstalled the windshield and started cleaning the outside stainless,etc. I found four of these thin rubber pieces in the bag,but can’t remember where they fit......can someone educate me,please?  Many thanks
« Last Edit: December 05, 2019, 01:55:21 PM by Rukiddin »

JD

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Where do these go? Windshield trim
« Reply #1 on: December 05, 2019, 01:53:34 PM »
near the corners, lower and upper, under the stainless...others will know better
« Last Edit: December 06, 2019, 11:18:34 AM by JD »
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

Tired Sheep

  • Full Member
  • ***
    • View Profile
Re: Where do these go? Windshield trim convertible
« Reply #2 on: December 05, 2019, 05:12:28 PM »
I think lower only. There is a notch over the fender where these fit in to

KR500

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Where do these go? Windshield trim convertible
« Reply #3 on: December 05, 2019, 05:46:58 PM »
Lower outer only. All Mustang body styles. They protect the trim from hitting the fenders. Ford used 1 or sometimes 2 per side, installed to the mouldings were the mouldings cover the fender area.
« Last Edit: December 05, 2019, 05:49:09 PM by KR500 »
Rodney Harrold,Ohio SAAC Rep,SAAC 68 Shelby Concourse Judge,68 GT500KR 02267

Rukiddin

  • Sr. Member
  • ****
    • View Profile
Re: Where do these go? Windshield trim convertible
« Reply #4 on: December 05, 2019, 06:30:27 PM »
BINGO! Now that makes sense....I wonder if they can be inserted after the molding is installed....... 8)

KR500

  • SAAC Member
  • Sr. Member
  • *
    • View Profile
Re: Where do these go? Windshield trim convertible
« Reply #5 on: December 06, 2019, 09:33:57 AM »
Installed on the moulding before installation on the car.
Rodney Harrold,Ohio SAAC Rep,SAAC 68 Shelby Concourse Judge,68 GT500KR 02267