News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

Ram Box

Started by FSTMRFR, January 29, 2020, 02:41:07 PM

Previous topic - Next topic

FSTMRFR

Scooped this NOS ram box up.  Curious on how many were actually made in both single  & duel 4's.  Any other history would be cool to know too..

FSTMRFR

With speed parts mag

gt350hr

   They were in the various Shelby catalogs for several years. By FAR , the best cross ram made for a small block Ford. It could use some "filling" in the base to help direct air flow as a single four. Better than the T/A 289 dula plane ,dual four when the top is switched to run two fours. T/A22 , Gary Goeringer ran one on the Maier Racing '67 coupe he used to own. Well over a thousand were made.
    Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

shelbydoug

Quote from: gt350hr on January 29, 2020, 04:27:51 PM
   They were in the various Shelby catalogs for several years. By FAR , the best cross ram made for a small block Ford. It could use some "filling" in the base to help direct air flow as a single four. Better than the T/A 289 dula plane ,dual four when the top is switched to run two fours. T/A22 , Gary Goeringer ran one on the Maier Racing '67 coupe he used to own. Well over a thousand were made.
    Randy

You just said that to make me want one right? ::)
68 GT350 Lives Matter!

gt350hr

   No , just the facts. A Vic Jr or "real Parker funnel web makes more power.
Celebrating 46 years of drag racing 6S477 and no end in sight.

shelbydoug

Quote from: gt350hr on March 23, 2020, 10:59:35 AM
   No , just the facts. A Vic Jr or "real Parker funnel web makes more power.

I don't deal in facts. Especially hurting ones like that. Ouch.  >:(

I live in the past but I know what's cooler. ;)
68 GT350 Lives Matter!

TA22 (Gary Goeringer)

What Randy says is true.........although the Maier car was a '68 S code coupe.  Another clarification...while the Box manifold(with single carburetor top) did make a few less HP than the much later technology of the Vic Jr or Parker(the best motor was 489 HP @7600), it did produce in excess of 400 ft/lbs of torque on a 305 ci engine with original/ported C6FE heads.  I dont know of many combos before or since that did. It was lightly massaged to prevent fuel puddling and performed flawlessly.

BTW, if anyone needs one of these, I still have one with a two carb top sitting at TOE...............PM me.

GG

gt350hr

    Thanks for chiming in Gary! The power you made with that engine certainly had the ( you know who) "GM" tounges wagging.
   Randy
Celebrating 46 years of drag racing 6S477 and no end in sight.

TA22 (Gary Goeringer)

Fortunately, I had the correspondence from Senter(Ford) to Maier which proved the manifold was given to him prior to its official introduction and ran in a T/A event or two prior to Maier receiving a Boss 302 from H/M..............otherwise, I would have had to run another period appearing manifold...........

SFM5S000

#9
I still have mine with both tops the 4V and the 8V. The single 4 top is the rarer and more desirable. Jay Cushman was asking me if I was willing to part with mine. I essentially said no. The photo was from a couple months ago.
What I don't have is the top cover gasket that FSTMRFR has.

Cheers
~Earl J


TA22 (Gary Goeringer)

.............we always made our own gaskets ............didnt know there were any NOS available

gt350shelb

Quote from: TA22 (Gary Goeringer) on March 23, 2020, 11:15:46 AM
What Randy says is true.........although the Maier car was a '68 S code coupe.  Another clarification...while the Box manifold(with single carburetor top) did make a few less HP than the much later technology of the Vic Jr or Parker(the best motor was 489 HP @7600), it did produce in excess of 400 ft/lbs of torque on a 305 ci engine with original/ported C6FE heads.  I dont know of many combos before or since that did. It was lightly massaged to prevent fuel puddling and performed flawlessly.

BTW, if anyone needs one of these, I still have one with a two carb top sitting at TOE...............PM me.

GG

rumor was they bought the 390 car and pulled engine  to be installed in the tow vehicle.
Some where some one is driving their collector car for the last time but they don't know it . Drive your car every time like it could be the last memory of it .

SFM5S000

While on the subject of Ram Box's and who else runs them Mark H./SFM5S170 his set up is very nice. I'd post a photo of his engine bay, but I think I'd need his permission to do so.

~E

shelbydoug

It won't fit with a/c will it?  :o
68 GT350 Lives Matter!

SFM5S000

Quote from: shelbydoug on March 23, 2020, 01:14:13 PM
It won't fit with a/c will it?  :o

Doug, sure it would, provided your 68 GT350 has a 302 based engine (8.2" deck block). It would be very cool in a 68. Here's a few pics of the Bill Maier car (Gary Goeringer's/TA22 old car) I took at the Rolex Reunion at Laguna the previous year. It's a race car that gets photographed so I'm sure he won't mind.

Cheers,
~Earl J