SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: mr68shelby on March 07, 2018, 09:38:09 PM

Title: GT500 Distributor Vacuum Line Routing and Fittings
Post by: mr68shelby on March 07, 2018, 09:38:09 PM
I am getting ready to install the vacuum tree for the distributor advance in the thermostat housing. 4 speed car. Mine had been removed at some point in its life. Does the vacuum line to the intake manifold attach to the front or rear PCV fitting? The rear PCV fitting on mine has one unused vacuum port. My front fitting has no vacuum ports at all. But I have a spare one that has two vacuum ports on it. Thanks in advance. Mike
Title: Re: GT500 Distributor Vacuum Line Routing and Fittings
Post by: TLea on March 11, 2018, 09:43:55 AM
Goes to one front other capped.  Rear port for smog valve and tilt on 4 sod car
Title: Re: GT500 Distributor Vacuum Line Routing and Fittings
Post by: mr68shelby on March 11, 2018, 12:03:35 PM
Thanks Tim!