I am looking for 2 vacuum fittings to complete the hardware I need to install the stock carburetor. I circled the two fittings in the pictures attached. One is the 90 degree vacuum fitting on the carb and the other is a spacer if you will to the vacuum tree on the back of the intake manifold. Anyone out there have spares of these they would part with?
Thank you, Corey
Corey,
I think I have the intake fitting, will check tomorrow. Does it need two vacuum hose nipples, because there are some with one and some with 3-4. Now that I think about it, I may have the carb fitting as well.
Chris
Found them both. $50 shipped for the pair if interested.
Added picture of found items.
4 vacuum ports is correct
Thank you Pete. I received my fitting today from Bob Gaines and it does in fact have 4 ports. I have seen pictures that show a short loop of vacuum hose between two of the ports. This hose is painted blue with the fitting. Is this correct?
Corey
Yes
(http://www.saacforum.com/gallery/8-230620082426.jpeg)
Perfect! Thank you Pete.