Yeah....
So I remember seeing a thread awhile back about finding original slotted vacuum advance plugs.
I have never had enough of them on hand to sell and barely enough to meet my own need.
The reproduction ones never looked right, too flat etc.
So I did the logical thing and had a cnc mill make a thousand.
If you want one, I'll be plating them tomorrow. $12 for each, can do better if you want to buy 10 or 100.
Pics:
-original installed
-Left to right, original, reproduction, the ones I had made
-ready to plate
(https://live.staticflickr.com/65535/51285001297_17e9b02f83_c.jpg) (https://flic.kr/p/2m8T39i)47071D62-02CA-44DF-96CF-E99D67CA2701 (https://flic.kr/p/2m8T39i) by Drew Pojedinec (https://www.flickr.com/photos/154777202@N07/), on Flickr
(https://live.staticflickr.com/65535/51285751866_236c944e6e_c.jpg) (https://flic.kr/p/2m8WTg9)4A7EFF0D-AD77-4CD3-9653-E49795830B0B (https://flic.kr/p/2m8WTg9) by Drew Pojedinec (https://www.flickr.com/photos/154777202@N07/), on Flickr
(https://live.staticflickr.com/65535/51285751711_745fffbdf7_c.jpg) (https://flic.kr/p/2m8WTdt)A244DFAD-50EE-4C67-B57B-51B2988DA17E (https://flic.kr/p/2m8WTdt) by Drew Pojedinec (https://www.flickr.com/photos/154777202@N07/), on Flickr
Thanks.... was trying to get them included and it wasn't working so good on my phone... will try on laptop
aha, that did it.... good, pictures came up. Anyway, now onto the next adventure, getting throttle trunnions made correctly. I have a thousand threaded on the wrong side *sigh*