The little vent on the front bowl that is covered by the "button/cap" on the arm seems to be missing the rubber sealer. Can i just glue another on the button or can i buy a new button with the rubber on it? i dont find anything on line. Thanks
Hello, I had my original GT350 4 sp CARB rebuilt by Steve Carburetor in NJ he did a great job & he replaced the breather , he may have some for sale office # 201-935-3499
here is pic, if this isnt what you were looking for sorry about that.
good luck
Mike
thank you
That part comes in most Holley rebuild kits. Or check Holley's web site and see if they have them separately. Yours sounds like the ones with a different arm with a steel washer and no rubber.
The ones in the Holley kits will work but are different then the assemblyline vent caps. I posted a picture of a what a assemblyline version looks like.
I bought a package of ten exact reproductions off of epay. I don't have a link as it was months ago when I bought them. The orange parts in kits are for accelerator pump "one way valves" on specific float bowls.
Quote from: gt350hr on August 30, 2021, 11:28:24 AM
I bought a package of ten exact reproductions off of epay. I don't have a link as it was months ago when I bought them. The orange parts in kits are for accelerator pump "one way valves" on specific float bowls.
Mile Bolduc sells them on ebay. I buy a handful every once in awhile.