Text only | Text with Images

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: cbrown on May 13, 2018, 07:03:47 PM

Title: brake booster metal vaccum line
Post by: cbrown on May 13, 2018, 07:03:47 PM
What metal line is correct for 68 gt500kr  running from brass fitting on intake to brake booster hose?  Is it the same as 69?  The one i have on there now has multiple bends  but i am thinking it is the style that comes straight out and only has one bend going rearward slightly.. 

chris
Title: Re: brake booster metal vaccum line
Post by: davez on May 13, 2018, 08:30:04 PM
My kr conv auto  has one slight  bend roughly midway 30 degrees angled toward the firewall, followed by the rubber hose
Dz
Title: Re: brake booster metal vaccum line
Post by: Coralsnake on May 13, 2018, 08:54:54 PM
The slight bend one is correct. The one with two right angles is not correct for 68 1/2
Title: Re: brake booster metal vaccum line
Post by: cbrown on May 13, 2018, 09:28:45 PM
Thank you.  I think they are idenfied wrong in nod catalog

Chris
Title: Re: brake booster metal vaccum line
Post by: Coralsnake on May 13, 2018, 10:22:52 PM
Shocking!
Text only | Text with Images