Does anyone have an update on the availability of rebuild kits for GT350H Mico master cylinder. Also need a correct master cylinder.
I'm thel owner of 6s550, and looked for a rebuild kit for over a year. No luck. My advice would be to contact Mico and buy their latest replacement master cylinder.k Ron
What is the number for the replacement master cylinder ?
Don't remember the number of the one on 550, now.We are on a cruise for the next 3 weeks. If you haven't got it by the end of the month, email me at rcmcam@yahoo.com Ron
If I remember correctly, the original MICO P/N was 704B1. When you call MICO (507-625-6426), just ask for their replacement part number. Hope this helps.
I don't know the status of availability of rebuild kits, but I ordered some replacement complete cylinders from Mico in 2008 through a local distributor. The part number was 03-20-455. At the time, wholesale was about $300. each.
I attempted to order additional units in June of 2022 but the supplier informed me that the replacement is now obsolete and they could find none in stock anywhere.
I attached some photos of the 2008 replacement so in the event you find anyone claiming to have one, you can use these for comparison.
Here is a link to Mico's current catalog: https://www.mico.com/sites/default/files/document-pdfs/84001001Hydraulic%20Master%20Cylinders.pdf (https://www.mico.com/sites/default/files/document-pdfs/84001001Hydraulic%20Master%20Cylinders.pdf)
I don't see the part number Bill references, but maybe a call to Mico could ask them if they have a part that supersedes that part number?
https://www.mico.com/ (https://www.mico.com/)
This looks like it from the picture?
https://www.mico.com/products/brake-actuation/master-cylinders/two-stage-master-cylinders (https://www.mico.com/products/brake-actuation/master-cylinders/two-stage-master-cylinders)