is this Shelby Mustang center console an original or a reproduction. There are no part numbers but it looks very well made.
this post should move to 1968 Shelby GT 350/500
It appears to have some elements of both oem and reproduction
If you send me hi res photos I can tell you
Coralsnake68@hotmail.com
Coralsnake
Thank you for your offer to help identify my console, I will send hi res pictures this weekend
Replies on the VMF suggested it is a home built one using some factory parts due to the plywood sides.
But I'd go by what the Coralsnake says.
In '68 the sides are originally plywood.
That one looks original to me. In any case it is very close to an original console.
Usually you do not see the notch in the gauge holes on the reproductions.
+1 on plywood. The first time I removed the console in my KR, I thought it had to be a home-made concoction.
That was in 1982, when depth/breadth of '68 Shelby knowledge wasn't readily attainable. However, after sending some pix to Kopec, it was confirmed as correct.
But, wow...plywood in a Shelby. Remnants of an East Texas chicken coop?
Devil's advocate: Plywood is cheaper to make into a rectangle box, by humans, than is creating a specially-molded piece of plastic.
So, they built the console like a high school shop project.
Downside is the plywood adds a couple of pounds to the car's weight, versus plastic. That'll add 0.0002 seconds to your ET.
So, adjust your bracket race dial-in accordingly. :P