SAAC Forum

Deals and Appeals => Wanted to Buy => Topic started by: Mike James on July 11, 2018, 09:59:11 AM

Title: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 11, 2018, 09:59:11 AM
I haven't been able to find the VIN stamped one for my car, Shelby 0786.  The second owner who's information was previously unknown in the registry, was identified because of an old title the 3rd owner had from 1970.  Anyways, I contacted the gentleman, Harold (Butch) Clark and he told me he took the 4 speed out in 1970 in DeQueen Arkansas and that the transmission was sold for $50 but he couldn't remember to who.  Anyways, the transmission if it exists is likely in east Texas, Arkansas, or South eastern Oklahoma based on who he raced with at that time.  Yes my poor car was drag raced for 30 years.  Anyways, long story short, of course I'd love to find that RUG-S but I will take a different t one if you have it.

Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: DC-DD on July 11, 2018, 11:32:34 AM

PM sent
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 11, 2018, 10:14:37 PM
Not sure you got my pm but terry's transmission is my old one, a68
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 15, 2018, 10:18:54 PM
The RUG-S needs to be appropriately dated for a January 67 car.  Is December 66 too close to the build date? 

Also if anyone has a good source for Shelby or Mustang parts in Arkansas please let me know as I am not giving up all hope of finding the original transmission - just most hope lol!
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Bob Gaines on July 15, 2018, 11:01:19 PM
Quote from: Mike James on July 15, 2018, 10:18:54 PM
The RUG-S needs to be appropriately dated for a January 67 car.  Is December 66 too close to the build date? 

Also if anyone has a good source for Shelby or Mustang parts in Arkansas please let me know as I am not giving up all hope of finding the original transmission - just most hope lol!
FYI It would not be prudent to pass up any opportunity if you are lucky enough to find one . This comes from decades of concours experience. They are that few and far between. Do you know where the Trans date codes are located since you were wanting a approximate date?
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: 2112 on July 16, 2018, 01:11:07 AM
Keith Craft in Arkadelphia carries FE blocks and may have the RUG-S Toploader, or a lead on one.

Seems they, like many businesses now days, have let their webpage die and do their business on Facebook (hate that).

Not sure I would buy an engine from them, but they sometimes have parts.

Have you tried the FE forum or Cobrjet Forum?
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 16, 2018, 08:01:10 AM
Ya thanks I tried the FE forum and I know Keith Kraft
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: 2112 on July 16, 2018, 10:52:33 AM
Just throwing out ideas.

Last two, er three;

Perogie or Cobra Automotive

Do a search on eBay every day.

Good luck
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Greg on July 16, 2018, 11:50:04 AM
You could run an ad in Hemmings.  The only issue to consider is you will have to provide the S/N.  To me thats not a big deal, as once that number is identified with you no one would copy it as you have identified it as being yours. 
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 17, 2018, 07:34:09 PM
Thanks guys
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Mike James on July 17, 2018, 07:35:05 PM
FYI I sold a 68 RUG-S to Terry Moore if you guys are looking.
Title: Re: Still Looking for RUG-S Toploader for 67 GT500
Post by: Chris Thauberger on July 17, 2018, 08:18:05 PM
Quote from: Mike James on July 17, 2018, 07:35:05 PM
FYI I sold a 68 RUG-S to Terry Moore if you guys are looking.

Interesting, I purchased a RUG-S from Terry Moore.

PM sent to Mike James

Chris