Print Page - Upper control arm lowering template

Title: Upper control arm lowering template
Post by: 6s1802 on October 21, 2018, 11:09:16 PM

Hey kids,
I had a template made years ago based on the diagram in a old issue of the Shelby American and it's off by a bit.
Does anyone offer a bolt on template for re drilling the holes in the proper location?

Title: Re: Upper control arm lowering template
Post by: 2112 on October 22, 2018, 01:25:34 AM

This is the nicest one I have seen;

http://www.mustangsunlimited.com/Mustang/Suspension/Control-Arms/Front-Control-Arms/Upper-Control-Arms/Upper-Control-Arm-Relocation-Kit-1-Drop-1967-1970-Mustang-Cougar-with-3-Bolt-Ball-Joints.axd

Title: Re: Upper control arm lowering template
Post by: 2112 on October 22, 2018, 01:28:45 AM

4-bolt

http://www.mustangsunlimited.com/Mustang/Suspension/Control-Arms/Front-Control-Arms/Upper-Control-Arms/Upper-Control-Arm-Relocation-Kit-1-3-4-Drop-1967-1970-Mustang-Cougar-with-4-Bolt-Ball-Joints.axd

Title: Re: Upper control arm lowering template
Post by: 1967 eight barrel on October 22, 2018, 03:55:18 AM

1" template in metal for about 15.00.
http://opentrackerracing.com/product/upper-control-arm-drop-template-1965-1966/

Title: Re: Upper control arm lowering template
Post by: 6s1802 on October 22, 2018, 07:54:28 PM

Thanks, Already ordered

Title: Re: Upper control arm lowering template
Post by: 2112 on October 22, 2018, 11:00:58 PM

Whoops, didn't realize I was in the '65-'66 category 😨

Title: Re: Upper control arm lowering template
Post by: 98SVT - was 06GT on October 23, 2018, 12:04:47 AM

I milled this one up in the 80s. I've done about 10 cars with it. 33/64" pins and 1/4" drill bushings to drill pilot holes.

SAAC Forum

The Cars => 1966 Shelby GT350/GT350H => Topic started by: 6s1802 on October 21, 2018, 11:09:16 PM