Text only | Text with Images

SAAC Forum

The Cars => 1968 Shelby GT350/500/500KR => Topic started by: RSOHC on June 09, 2019, 01:21:45 PM

Title: Tilt Wiring Harness
Post by: RSOHC on June 09, 2019, 01:21:45 PM
For a 1968 Shelby GT500, what are the connection points, if any, for the two compatible fittings located about 18 inches from the left end of the wiring harness for tilt.  The color codes for the wires are 262 brown, 32 Red with a blue stripe, 904 green with a red stripe, and 482 Blue with a Yellow stripe.  One of the fittings has three female and one male.  The other fitting has three male and one female.

Thanks

Lauran
Title: Re: Tilt Wiring Harness
Post by: Corey Bowcutt on June 09, 2019, 02:36:16 PM
Under the dash to the left of the steering column is  a main harness to the headlights with a connector exactly like the ones on your tilt harness.  You unplug these connectors from each other and plug the tilt-a-way harness between them.  I hope this makes sense?

Corey
Title: Re: Tilt Wiring Harness
Post by: RSOHC on June 09, 2019, 06:27:19 PM
Task Completed. 


Thanks

Lauran
Text only | Text with Images