Print Page - Roll bar ear's bolts

Title: Roll bar ear's bolts
Post by: JessC on July 20, 2019, 10:36:59 AM

I'm building a 1967 Gt350" Clone" not to pass it off as real one. This will NOT be a half A@@ clone !
I have the Branda Roll bar for it What bolts are used to mount to roof inner side thru ears on roll bar? I have 2 bolts that look like seat belt mounting bolts but smaller in Dia. and longer with same style of bolt head. also ideas on a "nut plate for inside roof structure .
Thanks, Jess

Title: Re: Roll bar ear's bolts
Post by: Tired Sheep on July 20, 2019, 11:12:36 AM

The Branda bar does not look like the original roll bar

Title: Re: Roll bar ear's bolts
Post by: shelbydoug on July 20, 2019, 12:12:42 PM

The original bar uses the original Mustang seat belt and shoulder harness bolts and roof mounting points.

Title: Re: Roll bar ear's bolts
Post by: JessC on July 20, 2019, 12:48:42 PM

would the shoulder harness mounting bolts on mustang be smaller in Dia. and longer than seat belt mounting bolts?

Title: Re: Roll bar ear's bolts
Post by: shelbydoug on July 20, 2019, 01:24:58 PM

Quote from: JessC on July 20, 2019, 12:48:42 PM
would the shoulder harness mounting bolts on mustang be smaller in Dia. and longer than seat belt mounting bolts?

Same size. I think they are 7/16 NF thread? I think though that the roof bolts use a larger hex head then the belts? Yellow cad plated.

SAAC Forum

The Cars => Replicas and Tribute => Topic started by: JessC on July 20, 2019, 10:36:59 AM