Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jbarela

Pages: [1] 2 3 ... 16
1
1965 GT350/R-Model / Brake drums
« on: June 30, 2023, 03:20:06 AM »
I can't find my notes.. I have a 4k dated diff, what would be the approximate car build date? Also would this rear end have the 65 drums with the three nubs or the later 66 style?
Thanks forecourt help.

2
Wanted to Buy / Re: 15 x 5.5 K-H/FoMoCo Steel Wheel
« on: March 04, 2023, 11:07:17 AM »
Call Craig at paradise wheels, he will take care of you for that rim.

3
Parts For Sale / 65 horn switches
« on: February 12, 2023, 03:13:40 PM »
Plastic thread..2650
Metal thread..1850

4
Wanted to Buy / Re: Wanted R model parts
« on: February 12, 2023, 12:36:32 AM »
Hello Roy, welcome. Are a 65 owner or are you building a clone/tribute. All parts you are asking for can be found on the open market..try cobra automotive, shelby parts and Restoration or delta bay mustang.

5
Appeals / Re: Cracked KH Brake Drum
« on: February 01, 2023, 12:35:03 AM »
+1 Charles....Contact Jesse at Shelby Parts, he can send it out to be resleeved

6
Appeals / Re: Gabriel shocks
« on: July 25, 2022, 06:34:09 PM »
I have these rears as spares..if pics dont show I cN PM someone to post.

7
Appeals / Re: Clunk out of rear end when shifting
« on: May 08, 2022, 11:48:29 AM »
The terrible thing is that there is less than a 100 miles on the rebuilt pumkin. The entire rear was restored kf course so new everything. I went with an LSD unit instead of a Detroit locker. I appreciate the feedback as I am not knowledgeable in the area. I figured it should all be a direct drive gearing so there would be no play. Definetly it never clunked in the past so going to let the shop figure it out.

8
Appeals / Clunk out of rear end when shifting
« on: May 07, 2022, 08:45:50 PM »
Hey there, the 66 is starting to clunk when I am slow on the clutch, slow dump kind of. Crawled under the car, the diff is leaking and I can turn the drive line back and forth with about 1/4 inch of play when in neutral..is that normal?

9
1965 GT350/R-Model / Re: Hood Prop Rod
« on: April 08, 2022, 01:16:44 PM »
Earl, I love always seeing your engine compartment with those webbers. So beautiful...I have a repop rod from Jim thats about 20 years old..dont have the spring hardware like yours..I feel like I should buy yours instead of trying to figure it out in the future..lol..

10
Up For Auction / Hone o drive 9inch 411 to 298
« on: February 12, 2022, 12:57:50 PM »
Not mine but saw it on my FB page. $7000 Seller is Robin Miller

11
1965 GT350/R-Model / 5S183
« on: February 01, 2022, 12:01:45 AM »
Looking for owner of #183 if anyone can put me in contact

12
Appeals / References for Delta Bay Mustang
« on: January 21, 2022, 11:51:48 PM »
Does anyone know if Delta Bay Mustang in Brentwood is still in business? I want to take the shelby and have door glass replaced with NOS pieces. I am in the bay area and they seem to be the closest to me. I call and email and no response.

Thanks!

13
Appeals / Re: 1965 Block off plate
« on: January 21, 2022, 11:44:45 PM »
Quote from: 6s1640 on November 03, 2021, 11:10:07 PM
Quote from: 6s1802 on November 03, 2021, 09:41:52 PM
As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.

Do you have the heater defrost duct vent delete plates?

Cory
thanks for the pics!! Can you possibly make me a template for the duct deletes. Need those, wonder what would be the best matching material to cut them out of??

14
Replicas and Tribute / Re: Who needs an R-Model gas tank?
« on: January 17, 2022, 11:43:34 PM »
I have only see one damaged one and it had the ribs just hammered down perfectly and the splash buck was just bolted or screwed to it? Not sure if the metal ring is needed to be welded in if going that route? Wish I really knew..

15
1966 Shelby GT350/GT350H / Re: Traction Bars
« on: November 06, 2021, 03:14:23 AM »
What was the reason for the change from strait to kinked?

Pages: [1] 2 3 ... 16