SAAC Forum

Nice car

Don't think that I have ever seen a regular 1967 GT500 go for anywhere near $852k.

Welcome to the forum

A couple of years ago, I wanted to make a factory 1967 GTA coupe a little more correct than when I got it. I got under the car and used a putty knife and gasoline to scrape off the black undercoat. Probably 95% came off without taking off the factory primer or drips. I then tested about 5 makers of red oxide primers and found one to be a really good match for my San Jose car. I then rattle canned the bottom. Not really concours, but more appealing than what it was before.

I have a GT factory cut out rear valance if you are interested. I took it off my 1967 GT500 as I needed the early Shelby worker manual cut outs. I have used it for a paint test panel so it currently has several types of blue paint on the face of it. Original red primer on the back. I could send pictures if you message me.

And the horn has worked fine ever since, knock on wood

oops, sorry. I posted it on the Concours Forum web site, not here.

I had to restore mine due to a shorted wire and have pictures and how I did it here in the threads somewhere.

Glad you were able to locate it

I watched an old tv show and found some nice Shelby Daytona Coupe video.  "The Monkees Race Again" "Leave the Driving to Us"   February 12, 1968
Davy drives the Monkeemobile in an auto race when the British entry (owned by an old friend of Davy's grandfather) is sabotaged by Baron Von Klutz (David Hurst) and his Klutzmobile.
The 'Klutzmobile' is the original Shelby Cobra Daytona Coupe (chassis #CSX2287). 

Very nice

Looks nice

Good luck!!

Are you from CT? I am in Bristol

very nice