SAAC Forum

Thanks Patrick. What's the trick to remove (or back up an inch or 2) the top part?

Does the console need to come out to remove the radio bezel? Unless I'm doing something wrong, there doesn't seem to be enough clearance for the 2 protruding bolts on the back side of the bottom part of the bezel to clear the console.

That helps a lot! Thanks Patrick

Bob

Whoever restored the lower right dash on my 69 GT500 did not include the belts or park reminder lights. After many months I was able to locate and purchase both lights/bezels and wiring. Can someone  please provide the proper dimensions for locating the bezels? I need the dimensions from the bottom of the park bezel to the bottom edge of the dash and the distance between the bottom of the belts bezel to top of the park bezel. See attached pic. Thank you!

Nothing in TX yet.......

Sorry, never received a notice from the forum that there was a reply. Please PM me if you come across another one. Thanks!

Yes, that's it.

I'm getting ready to drill the "belts" and "park" warning bezel/light holes in my lower dash. I found dimensions on another forum but it doesn't look correct (see below) based on dash pictures I've seen. Would anyone happen to have a template or have the actual measurements?

Thanks,
Bob

Looking for parking brake warning lamp bezel/lens and harness.

https://www.ebay.com/itm/175664685354?mkevt=1&mkpid=0&emsid=e11021.m5057.l9429&mkcid=7&ch=osgood&euid=d5d4f9ea200d4f1a9c16b035defc24e8&bu=43133954840&ut=RU&exe=0&ext=0&osub=-1%7E1&crd=20230326061246&segname=11021

Thanks for the insights. Will take your advice. I found an R Servo listed in the parts for sale forum.
Bob

Finally had an opportunity to get the camera scope out to start taking pics of casting numbers. I found a transmission casting number of RF-C6AP-7006 and on the servo cover, RF-C6AP-7D027-A with "D". The tag reads PGB AF1. Reading previous forum entries, looks like I should have a "R" servo for a 69 GT500 CJ. Is the case number even correct for the vehicle? It's a 3-speed C6 automatic with a 1/28/69 build date.

Quote from: Dan353 on March 05, 2023, 07:17:04 PM
I'm not sure if this will help.  My. GT 350 was built 1-6-69 no seat belt light and it isn't listed on my Marti report. It does have the park brake light

Are you're saying the Marti report does not list the deluxe seat belt option for your vehicle? If so, makes sense your dash does not have the Belts light.

I've seen a few 69-70 GT500's with "428 Cobra Jet" lettering on the valve covers. Did these come from the factory or where they after-market?

Got it.That helps a lot. Thanks AJ.