Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - George Schalk

Pages: [1] 2 3 ... 14
1
Up For Auction / Re: 5S208 - on Bring A Trailer
« on: January 25, 2023, 05:23:27 PM »
Quote from: Nova68 on January 25, 2023, 05:11:15 PM
I get it's not a perfect car. But anytime a car is listed on here it seems like everyone has to pick it apart. All the experts have to comment with all there knowledge. If some one is really interested they will search out the expert for real advise.
A potential buyer is not going to reach out to a knowledgeable "expert" if the buyer has no clue where to even go or how to contact that said expert.  The beauty part about BAT is, all the information and criticism is condensed in one area and that is in the comments section of BAT.  A potential buyer can take the comments with a grain of salt or use them to evaluate their decision on a purchase.  This only helps a buyer.  Granted some and most of the comments aren't worth anything, but those are the ones that can be taken with a grain of salt.

2
Up For Auction / Re: 67200F9A02386 on BAT
« on: December 14, 2022, 12:04:31 PM »
Quote from: 427hunter on December 14, 2022, 10:14:11 AM
It says bid to not sold?
The seller mentioned in the comments that himself and the high bidder came to an agreement after the auction and made a deal.

3
1967 Shelby GT350/500 / Re: GT350 #1341 is on the road again!
« on: December 13, 2022, 12:51:05 PM »
You did an awesome job Carl!!  The car looks and sounds amazing!!  8)

4
Up For Auction / Re: **BEWARE** Pookie is back at it
« on: December 13, 2022, 12:47:25 PM »
Quote from: Kent on December 13, 2022, 01:13:19 AM
I think for all the newbies here it would be interesting to also tell what is wrong with the guy and his parts as they don't know the whole story and with my English its difficult to write it down. Just a thought as there are some new members here who are looking for parts.
Let's just say Marty McIntosh is one not to be trusted.  He's made quite a name for himself by deceiving a lot of people in the Shelby community.  He goes by a few different aliases.  His claim to fame is to re-package used and reproduction parts, in original Ford boxes with the part numbers crossed out and advertise them as N.O.S.  You will definitely not get what you pay a lot of $$$ for.  He's definitely a con-man!!

5
Up For Auction / **BEWARE** Pookie is back at it
« on: December 12, 2022, 11:22:34 PM »
**BEWARE**
It looks like Marty McIntosh aka Pookie is back at it on Facebook on some of the Shelby pages.  Just thought I’d forewarn some potential victims.  Buyer beware!!

Regards,
George Schalk

6
Parts For Sale / Re: 67 68 Front Extended Inner Bumper Bracket Set
« on: September 15, 2022, 08:47:24 PM »
PM sent.  I’ll take the brackets.  Thanks

7
Wanted to Buy / Re: 67 GT 350
« on: August 31, 2022, 06:34:25 PM »
Quote from: stephen_becker on August 31, 2022, 05:50:38 PM
There was a guy in Texas that had a red one (factory documented Paxton) years ago and I lost touch with him - He bought it from original owner in the late 1980's - Cannot for the life of me remember the guys name - Jim Cowles knew it but, as you know, he has passed
RIP Jim
The gentleman Stephen is referring to is Bill Jansa from TX, who sold the car in 2011 as a project.  It was a factory Paxton car, #2309.  He offered it me, but at the time I was not in a position to buy another car, which I wish I would've bit the bullet and made accommodations since I do have the twin to it, consecutive #2310.   The car was a project, but painted and needed assembly.  He did mention the engine was a replacement HiPo, but the transmission was original with the vin stamped in it.  Since then, the car went through a full restoration and I'm not sure who has it or where it ended up.  I thought Colin Comer may have purchased it and completed the restoration.     

8
Services Offered / Re: I like saving forgotten carbs
« on: August 25, 2022, 06:57:31 PM »
WOW!!!  That's some outstanding work!!  Excellent restoration!!

9
Wanted to Buy / Re: wanted ...front shock lower round rubber washers
« on: August 24, 2022, 03:52:18 PM »
Reach out to Brown's Auto Body.  They have what you are looking for.

Here's a link to the site:  http://www.brownsautobodyservices.com/chassis

10
Up For Auction / Re: The most historically correct restored GT350 ?
« on: August 18, 2022, 04:00:39 PM »
A private deal in most cases is always better than a public auction deal!  ;)

Congrats!!

11
Services Offered / Re: I made a webpage for my Holley parts
« on: August 12, 2022, 03:10:06 PM »
Very nice website!!  It looks awesome and easy to navigate through it. 

12
Up For Auction / Re: White on Parchment Gt500 1967
« on: August 11, 2022, 04:11:11 PM »
Quote from: Vernon Estes on August 11, 2022, 03:51:00 PM
Quote from: 427hunter on August 11, 2022, 10:54:00 AM
Quote from: rcgt350 on August 11, 2022, 12:30:19 AM
My car(0031) has the welded on washers in the shock towers, they weren’t added, factory original


Maybe it's an early vs late thing or who knows, if Bob said some had them then some had them. The original cars I have seen did not have them but that a limited number of original cars in my wheelhouse. I had always assumed that as SA stopped doing the suspension mods that the washer stopped being used. The later 66 cars lost the drop, over-rides, etc, so in 1967 the change to be more about looks then racing was already well under way.

Trying to not go way off topic when this has been discussed in other threads....but it would be highly unusual to not have washers on an early 67. Ive never seen an early car which was reasonably "un-messed-with" which didnt have the washers.  Likewise (and I accept that this is controversial) but id consider it unusual to see washers on a mid production or later production 67. Every reasonably original, undisturbed mid and late production 67 ive ever had has lacked the washers.

That said, every car was "supposed" to get them. Clearly, many didn't. In fact, I'd say the majority likely didn't in 67. Adding the washers to a car that doesn't have them is sort of a "no harm no foul" sort of thing in my mind.

Kind regards,
Vern
Hey Vern, interesting observation and point of view about the shock tower caps (beehives), which your statements seem very similar to what I was trying to convey in a past post about the shock caps.  At least I'm not the only Shelby enthusiast with these controversial thoughts!! 

13
Up For Auction / Re: The most historically correct restored GT350 ?
« on: August 03, 2022, 04:41:49 PM »
Is there a scheduled date for when the car will debut on BAT?  Any pics you'd be willing to share to entice and tease us before the auction?   

14
Up For Auction / Re: The most historically correct restored GT350 ?
« on: August 03, 2022, 12:58:20 PM »
The car will definitely be bid up by someone who knows what the car really is and knows what it takes to make a car of this caliber i.e. reproduction parts vs. nos parts, tasteful mods vs. assembly-line correct.  All it takes is 2 bidders that really want it!!   

15
Cars For Sale / Re: 1967 Nightmist Blue GT500 4-speed on Bringatrailer
« on: August 01, 2022, 03:01:40 PM »
Quote from: SCJSTU on August 01, 2022, 02:35:38 PM
someone school me on engine detailing on a 67 big block.....is the blue overspray at front of engine on the intake correct?
Yes, the overspray on the leading front edge of the intake is correct on a '67 GT500 428 engine.  Ford painted the assembled 428 engines with the aluminum intake already installed and used a mask to cover the intake so it wouldn't get painted.  The mask covered the intake, but not completely, causing overspray on the edge of intake 

For the small block cars, Ford shipped the GT350 cars to SA with a std 289 HiPo assembly with the painted cast iron intake, which the aluminum intakes and carbs were later swapped out at SA.

Pages: [1] 2 3 ... 14