Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - JessC

Pages: [1] 2 3 4
1
1967 Shelby GT350/500 / Re: deluxe door panels
« on: March 07, 2023, 10:59:58 AM »
I would be intrested in The door panels, Bob

2
1967 Shelby GT350/500 / advertising vanity license plate
« on: February 03, 2023, 04:43:17 PM »
I'm wondering whats correct for a 1967 Shelby or mustang? from the dealers

3
1967 Shelby GT350/500 / Re: I need a measurement olease
« on: January 21, 2023, 05:48:11 PM »
Ok can you take a measurement  not from the center say in 2 places.. latch on  trunk lid does want to clear latch on body.

4
1967 Shelby GT350/500 / I need a measurement olease
« on: January 21, 2023, 10:34:01 AM »
  I need to know the opening width on 1967 mustang fastback trunk from inner edge to inner edge of tail light metal I get 15 inches. I know this not a Shelby.
Thank you Jess

5
The Lounge / n eed a measurment
« on: January 20, 2023, 07:30:48 PM »
I need to know the opening width on 1967 mustang fastback trunk from inner edge to inner edge of tail light metal I get 15 inches
Thank you Jess

6
Replicas and Tribute / 1967 GT350
« on: January 16, 2023, 01:28:30 PM »
HI, Did the GT350's use a cooler for power steering,  motor oil? if so could use a photo or 2 on hose routing.
Thanks, jess

7
Replicas and Tribute / air cleaner
« on: December 23, 2022, 09:23:31 AM »
What style is correct for my 67 GT350  build? the Oval  or the pricey  Hipo round air filter? Trying to make it look correct
Thanks

8
Replicas and Tribute / Mini starter
« on: December 07, 2022, 10:43:55 PM »
I working on my clone and I'm using a ford mini starter.I don't like the idea having it hot all the time.Question is do people fuse this and  what type?  How to wire using harness to dash?
Thank you

9
Have you talked Jim Marietta he worked for Shelby he states  he might have some info

10
The Lounge / amp meter wiring
« on: December 03, 2020, 07:35:25 PM »
I'm going to do my Amp meter wiring. But I'm using the ford mini starter with the solenoid for it.  I also have the after market amp lug holder on firewall (Branda item )
How to connect wiring to it?

11
Replicas and Tribute / Re: H pipe spacing
« on: November 16, 2020, 11:23:04 PM »
yes at the outlets thank you for the measurement

12
Replicas and Tribute / H pipe spacing
« on: November 16, 2020, 08:42:37 PM »
Hi,
I'm working on my 67 replica and I  need a measurement on the back section of "H" pipe center to center= trying to set transverse muffler as this would help, Oh I forgot pipe is 2 1/4
Thank you,
Jess

13
The Lounge / Radiator
« on: September 04, 2020, 11:20:07 AM »
HI,
I building my 67 289, Should I use a original 3 core Radiator or use a newer Alum. Type? I would like to keep a fan shroud and I'm using a Hipo Fan.
Thanks,
Jess

14
Appeals / Disc brake line
« on: July 24, 2020, 09:22:34 PM »
Hi,
I'm work on my 67 and I have a problem. It has factory Disc KH hays calipers. It seems like my hoses are to short to reach frame mount I did the arning drop and the car is on  jack stands. Hoses measure 15 inches long. Any Idea's whats going on and how to correct?

15
The Lounge / Firewall brake line
« on: March 24, 2020, 09:46:48 AM »
I'm working on a 1967 fastback and it has the tilt-away column and the  Midland brake booster. What brake line do I use the one that goes over Column or under it? for across the firewall.  There is  2  styles.The car has stock disk brakes.
Need some help here  as no brake line was with car.
Jess

Pages: [1] 2 3 4