SAAC Forum

Looking to purchase a vintage key fob for a 1967 gt500.

Just a shout out to Stewart for remarkable work. I recently received and installed my rebuilt lap belts and harnesses. They are stunning. Stewart was able to supply original parts for any I was missing, and helped me determine what was needed and what was not. Didn't try to over sell.( didn't have to. I saw his work!)
I had heard he could sometimes be difficult. Far from it!  All my calls were returned promptly and work was shipped on time. Highly recommended!
(How'd I do Stewart? Now pay up!)😄😄😄

I'm sure it's been asked many times. "What insurance company " After hibernation (over 50 years) my 67 should be ready for a test drive.
What company for the occasional driver quality car?
Once or twice a month. No long distance.  Thanks

Having new exhaust installed and would like to know how far should the tips extend beyond an uncut valance? Thanks

April car. Not concours correct, but not a Frankenstein either. 427 rather than 428. Shouldn't matter for this question.
Looking for a correct pvc hose from passenger side valve cover breather to bottom of air cleaner assembly.
Do not want to tap into intake.
Seems each nipple is slightly different diameter.
Suggestions please.

A little help please. So I've just installed the new engine in my 67 500. Cam was broke in on a stand by the builder. I've run it a few times (3 or 4 minutes each) just to check for leaks and whatever else I might have missed on the build. Idles about 8 or 900.
Yesterday I went to start it and the battery was low. It's an old battery while waiting for the new one. Connected the battery charger and fired her up. Checked on RPM, and the tach is not working. I've spoken with several people who say it shouldn't hurt to start it with the charger connected. I've done this many times in the past and hasn't been an issue. Any ideas? Thanks

Looking for an original 67 big block radiator for automatic.

Please help. I tried the 1967 section, but no response yet. Thought I'd try here.
There are 3 plugs on the dash side of the harness but I cannot find any diagrams as to where they plug. Help please?

Trying to determine where 3 plugs connect on dash side of firewall. This is the main harness running to the headlights. Any help or diagram would be Greatly appreciated.  Thanks

Finally located ammeter and oil pod for the car,but don't know location, color, or connectors for wires. Help please?

Thoughts on Blue Thunder lemans valve covers.
I am not concours correct as I will be running a
Tunnel port. Would like it to appear somewhat
Period correct? Thanks

Just purchased some NOS fender emblems. (2 piece). Of course the glue has dried up over the years. Any suggestions for attaching the sticker to the plate? Thanks

Upon putting 1551 back together I noticed some numbers I am curious about. Any help would be appreciated. Behind the rear license plate on the valance in grease pen is the number 307. Taking out the carpeting I noticed 307 on the underneath side.  And when removing the rear seat, once again 307 on the lower side. Thanks

I have a set of NOS 427 TRW  11 to 1 with pins and rings in their original boxes. Purchased in 1972. Yes,  they are old school and heavy. But, if you want to go there? $150 plus shipping?  Seattle

I have a NOS  medium riser camshaft that I purchased in about 1972.  EE-396. It's still in its perfect box with lube and paper work. New solids to match. $300 plus shipping? Seattle.