Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Topics - papa scoops

Pages: [1] 2 3
1966 Shelby GT350/GT350H / speedometer cable lenght
« on: October 23, 2023, 06:11:51 PM »
66 1122 t10m cast/cast, feb build. anybody know what the ORIGINAL cable length is? using the original housing, cable broke, being told that 4 speeds all use the same cable, but had same issue on another t10 66. it is not the same as toploader or any of the replacement cables from all of our vendors. i will keep original housing but will buy anything fore the core.

1966 Shelby GT350/GT350H / 66 radio block off plate
« on: September 29, 2023, 07:57:58 PM »
any one know where to get, not 65 style, 66 only. old or new repop ok, but must be 6 only. phred

1966 Shelby GT350/GT350H / under dash wire harness 66 san jose
« on: July 05, 2023, 06:02:36 PM »
who has best quality? with wiper harness. 66 under dash with fuse block. proper ends and connectors

CSX 2000 Series / daytona cobra model kit
« on: April 28, 2023, 05:04:15 PM »
gunze sagyo daytona model, getting ready to maybe build, as soon as i find it. what was the chassis number, quick history, what color is/ was it. just doing prelim history. thanks, scoops

1967 Shelby GT350/500 / factory supercharged 67 information
« on: December 12, 2022, 02:55:51 PM »
only a few made, looking for info that somebody collected? 67 350 lime green, was in washington state at one time. i think the owner told me it was factory installed, very nice low mile original, except rr had had very poor body repair, in nevada. had the washer bottle relocated to under the heater motor area, he was either original or second owner. think it was 4 speed, he was asking $9500 at the time, a while ago. sold. just interested in the washer relocation, if anyone knows if this was factory. i didnt buy it cause SMALL BLOCKS ARE FOR PUNKS! scoops

68 fastback, the trim around the rear seat latch, are there supose to be washers around the 4 screws? i see them offered, but my original car dosent have them and i see no marks where they would have been. did shelby loose them? car did have a warranty repair for a water leak when new, maybe ford lost them?

1968 Shelby GT350/500/500KR / inner quarter trim panels fastback
« on: September 01, 2022, 12:55:09 PM »
small trim that covers upper/lower 1/4 inner trim panels, should it have a slight bend in it around the roll bar? just noticed mine, it makes sense as the panels are tight fit. rh side fits slightly tighter as the roll bar must be slightly off center, maybe 1/16 inch.

Wanted to Buy / wanted
« on: July 09, 2022, 01:27:43 PM »
68 shelby donuts, around roll bar on the 1/4 inner trim. want originals, nice shape, no repos. thanks, scoops

1966 Shelby GT350/GT350H / windshield
« on: July 26, 2020, 04:17:01 AM »
what was the name of the company that does the date coded windshields, 66 clear, thicker, like way to kick out the original without wrecking original seal and not making huge mess of old glass. thanks, phred

1966 Shelby GT350/GT350H / speedometer cable length
« on: July 26, 2020, 04:13:28 AM »
anyone know the exact length of the original speedometer cable, tip to tip (the actual cable, not the housing) of 66 350? 4 speed t10. thanks, phred

1966 Shelby GT350/GT350H / fuel pumper 66 350
« on: April 18, 2020, 03:11:12 PM »
who has the best looking/ reliable replacement? have my original in perfect working order, don,t want rebuild (crimping sucks) but wnt one for sorta authentic look, and driving. phred

1966 Shelby GT350/GT350H / originak heater hose routing 66 350
« on: April 18, 2020, 03:07:43 PM »
any photos? which hose is inner/ outer,upper lower? just need to double check phred

Concours Talk / NO RADIO
« on: March 17, 2020, 09:17:16 PM »
if a car came without a radio, what , if anything filled the dash speaker hole? (not talking about the block off radio plate) would be same as falcon, or poss all fords? the speaker by he defrost vents. couldn't imagine  a big hole, but I never did pdi.s or radios until the later 60's. thanks, Phred

1966 Shelby GT350/GT350H / getting p.o.ed
« on: February 25, 2020, 12:35:33 PM »
66 350 open letter valve cover gaskets. been thru sveral sets of gaskets, all fresh and new, fel rpo, napa, no cheap ones and none fit remotely close. best found were the black rubber thick ones and trimed off the tabs. these are the original covers, un warped, never a leakage or fit problem, lst ones been on since the 70's, factory new ford service replacements. what are you using? stock original motor. I am aware of the problems with old nos gaskets shrinking and warping. what was the original gasket like? material, tabs,etc.  thanks, phred

1966 Shelby GT350/GT350H / hose clamps/ hoses
« on: February 14, 2020, 04:37:14 PM »
doing a bit of spring detail. car is feb 66 build #1122, both ford and Shelby, original. which radiator hose, oval or square, what hose clamp, tower or wire, correct heater hose clamp, tower or wire. motor is jan 66 and original. clutch equalizer bar natural or black, which under hood clutch return spring, (can't remember, think it was lower, but does have provision for the rare firewall pinchweld hole.)coil bracket is black, hole or no hole, mount bolt smooth center, natural (can't remember if it's original or not). also looking for dye to use for original carpet haver usual ever so slight fade to brown except package area slight fade to grey. anyone found original or repop windshield, clear and thick? thanks group. phred

Pages: [1] 2 3