SAAC Forum

I have a four speed shifter without rods for sale. Everything is complete other than the rods. The shifter itself is rusty looking and may need to be rebuilt. The chrome on the arm is not bad but would need to be rechromed for a show car. The original 4 speed knob is also present but would need to be restored. Price is $175 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I bought a 2018 GT350R brand new, with 65 KM on it, from the Ford dealer back in November. The dealer agreed to store the car for me until the spring. Well, The car arrived today on an enclosed trailer.

I would have taken it out for a drive today if the weather had been better. It looks like I am going to have to wait until the weekend to take it out. I have never driven one but I am excited to get in it and see what she's got.....Greg.

I have for sale a NOS sequential turn signal relay for sale. This part is in the original Ford box and is in excellent condition. The wire has 4 plugs on it along with a Ford tag that reads C8SZ-13A366-E.
Price on this part is $120 plus shipping. Email gandcmurphy@rogers.com for more information.

PS: Pics will be added shortly.

I have a 67-68 Shelby heater motor bracket for sale along with a 68-70 9" snubber bracket. The heater motor is in nice shape with some light pitting on the arm that sticks out. The snubber bracket will need to be cleaned and painted as it has pitting across the entire surface. The rubber is a Ford rubber. Price is $125 for the heater bracket and $115 for the snubber bracket. If interested, email gandcmurphy@rogers.com for pictures.

PS: It won't let me download pictures at this time.

I have a nos pcv valve for sale in the original autolite box. The part stamped on the box is C7OZ-6A666-A. The part is a nice aluminum color with a paper ring around it that has AUTOLITE and the part # on it. This PCV is correct for '67 GT500 cars and possibly other cars so please check the part number. Price is $50 plus shipping. If interested in more information, contact gandcmurphy@rogers.com Thanks.

I have a intake for a 65 Shelby plus some of the early 66 Shelby's for sale. It is stamped S1MS 9424-A. This intake has been bead blasted clean. It also has been welded around one of the holes where the thermostat fits. Other than that, this is one nice small lettered Cobra intake. It still has the bottom cover on it. All of the holes  look good and it has 4 original studs in the intake. Since this intake has a few defects, I am asking $1475 plus shipping for it. If interested, email gandcmurphy@rogers.com Thank

SOLD

I have a pair of original rear quarter glass side vents for sale. These are original so they will need some work done to them as there is the odd rivet missing and the odd one is also loose. The fiberglass has been painted white so one would have to strip that down using heavy duty oven cleaner and repaint it. Price is $350 plus shipping. Email gandcmurphy@rogers.com for more information.

I have a 289 hipo carb for sale. It is stamped C4OF-AL on the toe. The previous owner cleaned the carb up before I bought it. He also put a new kit in it so that it is ready to run.This carb is ready to run and go into your hipo right know. The price on the carb is $2100 plus shipping. If interested in more pictures, email gandcmurphy@rogers.com Thanks.

Hi,

I am trying to buy some parts from a guy in Stevensville, Texas and he will not ship them. I am looking for someone who might be able to pick them up for me and ship them to me. You will also be required to package them up. I will compensate  the gentleman/woman who does this for me. Please PM me. Thanks.

I have a pair of Shelby door panels for sale. These are a complete set minus the speaker grilles. They will need restoring as the arm rest portion on each one is tearing. They have the Shelby emblem, the wood grain insert with Shelby insert on each one, the stainless going around and the carpet at the bottom. The doors ar wrapped in a plastic which makes them look a little fuzzy. Price is $375 for the pair. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of upper roof vents for sale that fit 65 66 Shelby Fastbacks. These are complete with all the grills and venting on the back. These will only need to be taken apart and painted the desired color. The protectors are on the backs of the vents also. These are a nice clean pair with no cracks or damage. Price is $250 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of NOS convertible sill panels for sale. They are not in the Ford packaging but do have the Ford sticker with part number on the back. They were not stored the greatest as the do have some light scuffs on the top surface. The bottom surface is the worst with some light pitting scattered on the bottom. These are better than the repro's but not as good as the nice NOS so I will price them accordingly. Price for the pair is $175 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of 67-68 fastback rear interior quarter panels for sale. These are used and in very good condition. They will need about 1/16-1/8 " patch on the part the the seat comes down and sits on. other than that, they will just need a fresh coat of paint as there are not cracks or breaks anywhere else. Price is $350 for the pair. Email gandcmurphy@rogers.com for additional pictures. Thanks.

I have a used pair of the convertible chrome pieces that go on the pillar for 69-70 Shelby or Mustang. The parts have been cleaned and polished and look like new. Price is $100 plus shipping. If interested in pics, email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of 65-66 Shelby/Mustang NOS convertible 1/4 panels for sale. These are the red primer ones and are earlier then the black primer ones. These are in excellent condition with just some scuffing and fading of the red primer face. The part numbers on the back are C5ZZ-7627846-B, 7-B. The price for the pair is $2000 plus shipping but prefer not to ship. I live in Ontario,Canada about 1 hour from Buffalo. Email gandcmurphy@rogers.com if interested. Thanks.

I have an NOS pop open 67 or 68 Shelby or Mustang gas cap for sale. When I bought this it was not in a Ford or Shelby box but was wrapped in plastic. On the backside is C7ZA-9A112-B  1 SM X0-1930. It does have a couple of small imperfections on the front face but the rest of the chrome is excellent. Price is $650 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a NOS pair of exhaust tips for sale that go on a 65-66 GT Mustang or one with the exhaust tip option. The are in the original Ford boxes with part number C5ZZ-5255-C,D and are in excellent condition. Price is $275 plus shipping. If interested, email gandcmurphy@rogers.com  Thanks.

I have a nos 65 66 front lower valance for sale. This valance is the early stamping red primer that has a few light scuffs on the front from sitting around. The valance is in excellent condition with no dents. The part number in yellow paint on the back is C5ZZ-17A939-A and is date MAR 11 80. Price is $450 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have 4 NOS 69-70 chrome side markers and 4 NOS side marker bezels for sale. I have 4 Ford boxes with a C9AZ-15A440A and two boxes C9DZ-15A215-C . Two of the boxes are missing for the other two but they are wrapped up in plastic and taped together and I guarantee they are NOS also.. These are hard to find parts and your car deserves the better fitting Ford part. If interested in pictures, email gandcmurphy@rogers.com. Price is $250 plus shipping.

I have two 69-70 Shelby tail light panels for sale. The first is a reproduction that is brand new,never used before for $325. The second one is an original that is going to need some repairs on each end. It has had some repairs already. Price is $650 for this one.

Email gandcmurphy@rogers.com if interested in pictures. Shipping is extra on each item. Thanks.