SAAC Forum

I have a balancer for sale that fits a 428 CJ Mustang. It is stamped C8AE-A. This balancer has a good rubber in it but it will need cleaning and a fresh coat of paint put on it. Price is $50.

I have a pair of '68 front side marker lights for sale. These are used but in good condition. They will just need some cleaning. Price is $95 plus shipping for the pair.

I also have a set of NOS front side marker lights for sale. These are in excellent condition. Price is $350 plus shipping for the pair.

Email gandcmurphy@roers.com if interested. Thanks.

I have a NOS '70 Mustang sales brochure and a '70 Performance Buyer's Digest For Sale. I got these from a guy who picked them up at the dealership in 1970 and stored them away. Both these magazines are in excellent condition with no damage or pages missing. Price on the pair of magazines is $125 plus shipping. If interested, email gandcmurphy@rogers.com for pictures. Thanks.

SOLD

I have a '70 Mustang rear spoiler for sale. This spoiler will need cleaning and a fresh coat of paint or it can be used as is. It does not have any cracks or repairs anywhere on it. It does come with the mounting brackets that have a D0ZB part number on each bracket. The nuts and bracket to mount it are also present. Finish off that Mustang with a sporty spoiler. Price is $350 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have 5 '69 Mustang Ford shop manuals for sale. I would imagine they would work for some Shelby items also. They are in good condition other than the cover on book #3 as it has a patch on part of it. All 5 manuals for $100 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a bare 69 70 Mustang hood scoop for sale. This is a bare piece other than the Cobra Jet emblems that are on it. I have the one emblem that is off the scoop and one is on the scoop. This piece will need cleaning and a fresh coat of paint applied. You can then apply the two Cobra Jet emblems after it is painted. The scoop is a quick way to dress up that Q code Mustang. Price is $150 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have the woodgrain piece that goes above the glove box for sale. This piece is in nice condition. The 2 screw hole mounting tabs are partially broken out but a screw will still be able to tighten up and hold the piece in place. This one has no clock in it but does say MUSTANG in the lower right corner. The black trim around it is also in nice condition. A rare piece. Price is $135 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have a NOS battery tray for a 65 66 Shelby or Mustang for sale. The part number on the sticker is C5ZZ-10732-C. This piece is in really nice shape with only a few spots of minor surface rust. It will just need to be cleaned and painted a fresh coat of black. Price is $75 plus shipping. Email gandcmurphy@rogers.com if interested. Thanks.

I have a pair of original 289 hipo valve covers for sale. These valve covers will need a good cleaning before use. The chrome is good on both valve covers. Each valve covers has some small dents. They can be repaired or use them as is after cleaning them. Price is $200 for the pair. If interested, email gandcmurphy@rogers.com Thanks.

I have a chrome pair of 67 Mustang valve covers and a 67 Mustang air cleaner for sale. These are both for the 390 engine. The valve covers are in pretty good condition with only a small sent/scratch on the end of one of them. The chrome is in pretty good condition on both valve covers. They will both need cleaning up to use as they are.
I also have a 67 Mustang 390 air cleaner for sale. The base has two screens in it and there is no damage anywhere on the base. It will just need to be painted blue to be show ready. The lid is in very nice condition. The rubber on the bottom is good with no breaks or splits. The chrome is also in good condition with just a little bit of peeling at the back. This air cleaner is in good overall condition.
The price for the pair is $600 plus shipping. Email gandcmurphy@rogers.com if interested.

I have 2 pair of NOS rocker moldings that fit a 65 or 66 Mustang. This can go on a coupe, convertible or fastback. They are in excellent shape but do not come with clips to fasten them to the car. The paper they cam in is not in the best condition but it is partially there. Price is $350 for a set. If interested, email gandcmurphy@rogers.com Thanks.

I have a pair of red primer fastback 1/4 panels for sale that will fit a 65 or 66 Mustang or Shelby. They have the yellow part #'s stamped on the back of each part. The part #'s are C5ZZ-6327846-A and C5ZZ-6327847-A. The one is still in it's original Ford wrapper. The other one has a small dent (no bigger than a quarter and not deep) just above the wheel well and almost below the ZZ in the part number.  Other than that, they are both in excellent condition. The parts are located in Ontario Canada about 1 hour from Buffalo. It is the buyer's responsibility to arrange shipping. It is no problem for the buyer to take these across the border. Price is $3200 for the pair. If interested in pictures, email gandcmurphy@rogers.com Thanks.

I have a left and a right NOS front seat side chromes pieces for a 65-66 Mustang. The pieces are in excellent condition. The have part numbers C5ZZ-6561616-A and C5ZZ-6561617-A on the tags. These are ready to install to make the interior look great. Price is $325 for the pair. Email gandcmurphy@rogers.com if interested. Thanks.

I have a AM-FM radio for a 1970 Montego for sale. The radio is marked DOGA on the one side. This radio comes with the speaker wires and the switch for the speakers still attached to the radio. None of the wires are cut. The radio was pulled out of a car many years ago in good working order. It also comes with a radio faceplate and the inner part of the knobs as both out knobs are missing. The push buttons work fine as the indicator moves when pushed. This is a rare radio in good condition. Price is $550 plus shipping. If interested, email gandcmurphy@rogers.com Thanks.

I have a red primer rear valance with the exhaust cut outs that fits Shelby and GT Mustang's for sale. This piece is in excellent condition with only some minor shelf wear. It does not have any dents or repairs. The part number on the back is C7ZZ-6540544-D. This is correct for a later Shelby and a Mustang with the GT exhaust. Price is $450 plus shipping. Email gandcmurphy@rogers.com for more info.

I have a few different NOS items that I am listing for sale that fit 65-66 Mustang or Shelby.

1) Pair of left and right NOS convertible 1/4 panels. These are red primer quarters which are the earlier stampings and more desirable ones to use. They do have some very light surface rust in places. One quarter has two spots of the primer worn off about 2" right at the back. The part numbers on the back of each is in yellow paint and is C5ZZ-7627847-A,B. Other than that, these quarter panels are in excellent condition and ready to use. Price is $1250 for the pair. I am located 1 hour from Buffalo in Canada and prefer to get these picked up instead of shipping them.

2) NOS red primer front valance panel. This is also red primer with part number C5ZZ-17A939-A stamped on the back. This piece also has some very light scuffs from sitting around. Other than that, it is in excellent condition and is ready to use. Price is $295 plus shipping.

3) NOS red primer left hand inner wheel house. This part is for the driver side and has number C5ZZ-6527887-A stamped in yellow primer. This part also has a few spots of very light scuffs and some very very light rust. This part is in excellent condition and is ready to use. Price is $200 plus shipping.

If interested in more pictures, email gandcmurphy@rogers.com  Thanks...Greg.

This is not a Shelby, it is a loaded 2020 Mustang GT convert. It has very low kilometers with just over 7600 showing on the odometer which is about 4800 miles. I bought this car new in the spring of 2020 and it is stored every winter.. It has over $9000 in total options including automatic transmission, black accent package, adaptive cruise control, active valve performance exhaust, am/fm radio with CD and HD radio. It also has black ebony leather interior with air and air condition seats. This car is like new and is very fast with the 5.0 litre. Price is $52,000. If interested, shoot me an email at gandcmurphy@rogers.com. The car is in Canada about 1 hour from Buffalo.

I have a very early 66 Shelby carb for sale. On the airhorn is LIST 3259 and a date code of 581. This carb would be good for a carryover car or an early 66 production car. it could also be used on a 65 Shelby or later 66 Shelby if you were not worried about the date code. The car has the correct metering blocks 4560 and 4756. I acquired this carb from a guy who was selling it for his sister as the husband, who had a Shelby, past away. He told me that the carb had been rebuilt before but did not know who done it. He also told me that the carb had been used but not very much so it will probably need to be rebuilt again. The carb is complete and could be used as is with some new seals. I have some additional pictures if required. Price is $3200 plus shipping.

i have one NOS rocker panel molding that would fit a '69 Mustang. The part is in good condition with only some very minor shelf wear. This part still has it's Ford wrapper with part number C9ZZ-6510177-A stamped on the back of the paper. Price is $300 plus shipping. Email gandcmurphy@rogers.com if interested.

I have a '70 Boss 302 carb for sale. This carb was just rebuilt and looks as new. On the air horn is stamped D0ZF-9510-Z, LIST 4653, 052. it also has 4653 stamped in blue on the air horn. It also has the correct metering blocks of 6396 and 6213. This carb is in excellent condition and would make your Boss stand out. Price is $2000. If interested in pics, email gandcmurphy@rogers.com Thanks.