News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Jbarela

#1
Wanted to Buy / 66 hipo drive shaft
March 18, 2024, 01:03:50 AM
I am looking for an original 66 hipo drive shaft. Money is burning a hole in my pocket..

Thanks in advance guys.
#2
Wanted to Buy / Webbers!!!
March 13, 2024, 02:22:55 AM
I need 48IDA or 48IDA1 or a combination of those two in the 600-1200 serial number range. Italy made
#3
1965 GT350/R-Model / Brake drums
June 30, 2023, 03:20:06 AM
I can't find my notes.. I have a 4k dated diff, what would be the approximate car build date? Also would this rear end have the 65 drums with the three nubs or the later 66 style?
Thanks forecourt help.
#4
Wanted to Buy / Re: 15 x 5.5 K-H/FoMoCo Steel Wheel
March 04, 2023, 11:07:17 AM
Call Craig at paradise wheels, he will take care of you for that rim.
#5
Parts For Sale / 65 horn switches
February 12, 2023, 03:13:40 PM
Plastic thread..2650
Metal thread..1850
#6
Wanted to Buy / Re: Wanted R model parts
February 12, 2023, 12:36:32 AM
Hello Roy, welcome. Are a 65 owner or are you building a clone/tribute. All parts you are asking for can be found on the open market..try cobra automotive, shelby parts and Restoration or delta bay mustang.
#7
Appeals / Re: Cracked KH Brake Drum
February 01, 2023, 12:35:03 AM
+1 Charles....Contact Jesse at Shelby Parts, he can send it out to be resleeved
#8
Appeals / Re: Gabriel shocks
July 25, 2022, 06:34:09 PM
I have these rears as spares..if pics dont show I cN PM someone to post.
#9
Appeals / Re: Clunk out of rear end when shifting
May 08, 2022, 11:48:29 AM
The terrible thing is that there is less than a 100 miles on the rebuilt pumkin. The entire rear was restored kf course so new everything. I went with an LSD unit instead of a Detroit locker. I appreciate the feedback as I am not knowledgeable in the area. I figured it should all be a direct drive gearing so there would be no play. Definetly it never clunked in the past so going to let the shop figure it out.
#10
Appeals / Clunk out of rear end when shifting
May 07, 2022, 08:45:50 PM
Hey there, the 66 is starting to clunk when I am slow on the clutch, slow dump kind of. Crawled under the car, the diff is leaking and I can turn the drive line back and forth with about 1/4 inch of play when in neutral..is that normal?
#11
1965 GT350/R-Model / Re: Hood Prop Rod
April 08, 2022, 01:16:44 PM
Earl, I love always seeing your engine compartment with those webbers. So beautiful...I have a repop rod from Jim thats about 20 years old..dont have the spring hardware like yours..I feel like I should buy yours instead of trying to figure it out in the future..lol..
#12
Up For Auction / Hone o drive 9inch 411 to 298
February 12, 2022, 12:57:50 PM
Not mine but saw it on my FB page. $7000 Seller is Robin Miller
#13
1965 GT350/R-Model / 5S183
February 01, 2022, 12:01:45 AM
Looking for owner of #183 if anyone can put me in contact
#14
Appeals / References for Delta Bay Mustang
January 21, 2022, 11:51:48 PM
Does anyone know if Delta Bay Mustang in Brentwood is still in business? I want to take the shelby and have door glass replaced with NOS pieces. I am in the bay area and they seem to be the closest to me. I call and email and no response.

Thanks!
#15
Appeals / Re: 1965 Block off plate
January 21, 2022, 11:44:45 PM
Quote from: 6s1640 on November 03, 2021, 11:10:07 PM
Quote from: 6s1802 on November 03, 2021, 09:41:52 PM
As far as anybody can tell all 65-66 street cars came with heaters and lighters. If I'm wrong somebody please let me know. I run a heater delete because it keeps that annoying heater from eventually leaking on the floor and taking it out. Also like the clean engine compartment. The lighter delete plug is correct, I have one on my '65 coupe.

Do you have the heater defrost duct vent delete plates?

Cory
thanks for the pics!! Can you possibly make me a template for the duct deletes. Need those, wonder what would be the best matching material to cut them out of??