SAAC Forum

There are ones that replace holley carbs. Here's one:

https://fitechefi.com/product/30061-go-efi-2x4-625hp-system/

Just do a little Google research. As for fuel systems there's a few ways to go about it. Most systems return excess fuel to the gas tank or to a remote reservoir. You can buy a new gas tank that is already set up with a new high pressure fuel pump and a fitting for fuel return. You can also get a remote fuel system such as this one which makes everything super easy if you have a place to mount it:

https://www.jegs.com/i/FITech-Fuel-Injection/546/50004/10002/-1

       Roy

I started with Flowmaster single chamber, then 2 chamber and finally 3 chamber and It never changed very much inside but it's not bad outside. Had a friend blast by at full throttle and I was very surprised how nice it sounded.

        Roy

Have you tried swapping drums side to side to see if That will help you with more information?

        Roy

Shelby73, you have quite the collection yourself 👍
Mark p, at least I have 2 Mustangs to the right of the signs😜

       Roy

Pretty sure I see the problem. The entire assembly does not seem to be centered. If you look at the 3rd picture there's a big gap from the shoe to the rear side of the backing plate and the 4th picture shows almost none.

       Roy

Here's some of mine. Pic of garage shows 74 VW bug on the left, then my supercharged SVT Focus then a 65 4 door Chevy Impala. Then down the middle is a 69 Bug, a 78 King Cobra, an 87 Escort Gt and then a 70 Boss 302 that used to be raced. On the right is a 69 Gt Mustang BB coupe with my wife's nephews 84 Firebird. Another couple showing my 70 Mustang that has been in Hot Rod magazine, Mustang Illustrated and 7 calendars and my 93 Supercab Lightning which has been in 8 or 9 magazines and on display with Ford at the 94 and 95 SEMA shows in front of the convention center. My Lightning is the blue one in the picture. Other vehicles are 92 5.0 5 speed Ranger, 98 SVT Contour, 99 Toyota corolla and a 2005 cadillac cts.

      Roy

A lot of times when I try to post pictures I get a message saying "your attachment has failed security checks and cannot be uploaded. Please consult the forum administrator". I don't know who that is. Any help would be greatly appreciated.

    TIA.  ROY

GLHS stands for goes like hot sh$t. Straight from Carroll's mouth to my ears while sitting on a couch talking at the 1988 SEMA show where he signed a few Shelby posters I happened to have with me.

         Roy

Do you guys know what GLHS stands for?

        Roy

Mark, I feel your pain. My wife and I have been taking care of her sister for 14 years and 7 months. She has severe MS, alzheimers and dementia and is 90% disabled. Can just barely talk or feed herself. My wife has to sit with her to tell her how to eat, swallow and drink. One of her sons called last year on mothers day and she didn't even remember that she had 2 sons and 2 daughters. I will click on the link and make a donation. Good luck with your walk.

       Roy

Here is probably the best article I have seen written on the tunnelport 302.

https://www.motortrend.com/news/hrdp-1305-the-story-behind-fords-iii-fated-1968-tunnel-port-302/

         Roy.

Post on the Boss forum.

       Roy

The price is in the name of this post.

        Roy.

Is same thing for me.

      Roy.

Take that aluminum block and bore it to 4.125 with a 3.25 crank and you will have a nice 347ci motor that can rev to 8 grand if you want.

       Roy