SAAC Forum

was sent a pair of leaf springs to detail.   the have square hole clamps holding them together - look like they have never been apart. Ive never seen any real ones except round hold clamps . Im posting a pic of the stamped number on the small leaf.  does anyone else have original 67 springs  with square hole clamps?

some great Footage   from 63 RA 500   and some pics of Bobby Brown - wildman cobra driver

https://www.youtube.com/watch?v=qxRwxpUdxQU&list=RDqxRwxpUdxQU&index=1

just talked  to SAAC Hierarchy and they decided to pull the plug on this year convention.  there will be an email blast to explain more. Made total sense what I heard

65 GT350 Trunk Mounted Battery cable kit
we make this concours quality trunk mount kit. I had to make up 3 so we have 2 in stock
Complete kit includes
correct vacuum formed tray -using original to make tooling
rubber coated holddown clamp
zinc Plated correct length carriage bolts and wing nuts
Positive long battery cable with correct style black boot
cable retaining clamps with rivets
negative cable with Ford engineering numbers coiled
$525 plus exact insured shipping we prefer paypal friends and family but will take cc. we will ship overseas and Canada by USPS
920 434 3645 jim (at) Shelbyparts (dot) com

not mine but trusted seller

https://phoenix.craigslist.org/evl/pts/d/prescott-valley-nos-bud-moore-boss-302/7103314205.html

I recently acquired a totally greasy 3rd member and when I had it cleaned came up with this tag 

C5GA-D    4L11  5CB   SP  so far the 4L11  checks out for ratio and limited lip  .  date corresponds with the casting date on the case.  im puzzled by the Tag  ID  none of my books show this number. Looks like a Mercury Comet type engineering . number to me

Have a real bad one that I can't repair   any one have one that's got just on break?

https://phoenix.craigslist.org/evl/pts/d/prescott-valley-67-shelby-140-mph/7099997965.html

https://phoenix.craigslist.org/evl/pts/7099994267.html


legit guy   -have done tons of business with him    - he may have a 500 button too

Mustang. Shelby , Boss , 1968/9     9 inch  axle tube.  54 inches flange to flange  .  Bare tube. boiled out at machine shop,  glass beaded to bare steel ,  epoxy primered.  2 hole version as used in 68,69 Mustang and Cougar with 31 spline axles /428 CJ    and 1969 Boss 302/429 
Although this came out of the southwest this has some pitting  which could be taken care of with a couple coats of build primer and some some elbow grease sanding it .  Perfectly good to use as is . If anyone wants more pics  send me an email or call me . i can ship this is but keep in mind it will be in an oversize box.
First $500  plus the ride 920 434 3645   jim  at shelbyparts dot co

https://phoenix.craigslist.org/evl/pts/7100007533.html        he has a bunch of 67 Shelby stuff listed.  bought a lot of stuff from him over the years  - not a scam     his name is Terry Moore

AC Shelby Cobra Raydyot mirror.  this is a brand new mirror that has been faithfully replicated to the original versions from the 60s with the proper Raydyot logo.   Virtually ever Cobra race car back on the day used this mirror along with many many scca race cars.    $195  plus shipping    920 434 3645  jim@shelbyparts.com       we prefer paypal friends and family  but will take a check or cc

Shelby  1969/70  Rear lower valance with exhaust opening cut.  I dont normally do these except for our own restorations as they are a real pain in the ass to do  .  but I had another restorer ask me to do 2 for him .  I have a pattern  of an original valance hanging on my wall from an original paint car we restored many years ago . We start with a new best quality standard valence  and slowly carve the hole  until its close to the right shape . then we smooth out the rough spots  close enough  to let the final painter  do the rest.  We ship these in an oversize box  with styrofoam padding  insured.  Price is $225 plus the ride   - around $40    shipping to a business is always cheaper (920) 434 3645   jim at shelby parts  dot com

NOS 289 Hipo Connecting Rods  . New in Ford Boxes - super rare to find and i perfect shape.  well stored.  C30Z-6200-C  K code .   when was the last time you saw  set of these with the proper rectangular bolts.   Most all are boss 302 football head.  Looks at the pics they are superb/  another great parts from my retired Ford dealer Im helping out.  Last year I needed one rod and paid $250  for a new one  that was just (1)  First $1500  plus the ride insured UPS shipping.  we prefer paypal friends and famliy   but will take a check or CC   920 434 3645   jim@shelbyparts.com

289 Hipo K code Carb  NOS   for 1966 GT350 automatic     SOLD


In 45 years  of  messing with restoration  and parts  this is the first one of these Ive ever held in my hand .  This came from my retired Ford dealer friend that Im helping out  and its the gift that keeps on giving.  Its never been mounted as you can see the holes have no marks.  C6Z-F stamped on pad .  He had it wrapped up in some towels - go figure?   Check out the pics.  its the real deal .  D-chromate plating still very nice.   If anyone wants more pics  let me know  .   this is NOS and nice and priced to sell!    .    920 434 3645    jim at shelbyparts dot com

1965/66 Shelby R Model Rollbar  Kit.    Original vendor rollbar MFG  makes these.  They will fit all 65-66  Mustang Fastbacks  if you remove the rear folding area.  I had to buy 5 bars to get any discount at all.    These retail for $529 and I can ship them UPS or speedee.  they come without the rear supports welded to allow for better fit.    Our Price while they last $475 plus the ride  - usually between $125 and $175 or you can pickup in Green Bay.  send me your address for exact shipping quote - business addresses are cheaper   920 434 3645   jim@shelbyparts.com  we prefer paypal but CC also can be used

260/289 Shelby Cobra Optional Valve covers - originals

this is a great set of very early  sandcast Cobra powered by Ford valve covers for 260/289 Ford engines.  These were the factory covers listed on one of the Group options when ordering a small block Cobra in 63 or 64.  and were sold by Shelby American in their early cobra dressup kits These early covers were never reproduced and have no markings like the later covers  which then had the Buddy Bar on the inside.  Guaranteed to be originals.  we did a full restoration as they are  almost 60 years old and needed some love.  they were in peally nice shape prior and we didnt have to weld anything  which is rare.  They were cleaned in a jet spray washer,  low pressure glass beaded with fine beads.   any small nicks  were removed from the to be polished areas.  beaded with the proper coarse grit.  finds and letters were carefully sanded to a 600 Grit finish and then sent to the polisher for the factory mirror finish.   Cleaned and ready to install.  will fit all 260/289 engines with a front mount oil fill tube in timing chain cover.  We acquired these for a customer that wanted this look but changed directions when he went to weber carbs..  First $1200 plus the ride.  We perfer paypal friends and family but will take a check or CC.  we will carefully package these in foam and will ship worldwide  .  920 434 3645    Jim@shelbyparts.com

After waiting over a year to get the high quality USA made Cobra Lemans Covers.  I ordered 5 sets and got two.   normal cost on these for incorrect  sanded finish fins and letters is $485  a set.   we make these with concours proper polished fins and letters which is a royal pain to do since they are sanded so rough.  loads of time and material which costs about $125  per set to get them right.   I have one set available which will go on ebay for $595  pr  ifthey dont sell outside ebay this week.      First $575  Postpaid  We prefer paypal friends and family  to our email address   (920) 434 3645   jim@shelbyparts.com     

sold



super nice set of drums  - detailed to concours   10 x 2 1/2   Proper for 65/7  shelby cars.  measured out at 10 and we took maybe a couple thousandths  off  stipped to bare metal.  phosphated,  remachined bare metal areas  and oiled with T9     wipe off brake contac area and install      we prefer paypal friends and family but will accept checks or cc    920 434 3645

saac forum I can do $50  plus shipping  $8    Paypal friends and family  jim@shelbyparts.com

https://www.ebay.com/itm/283810822600