Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Rickmustang

Pages: 1 [2] 3
16
SAAC Forum Discussion Area / Shifter ID Help
« on: February 14, 2022, 10:16:46 PM »
I think this is for a 65-66 toploader. Any other opinions on it? Thanks for the help.

17
Appeals / Troubleshooting Brake Light Help
« on: November 23, 2021, 11:47:22 AM »
I cannot get my brake lights to come on, although my emergency flashers work fine. When I disconnect the two pin connector of the taillight harness, and push the brakes, I have 12 volts. When I connect the connector, and push the brakes, I don't have any voltage on either side of the connector. So the brake light switch seems to be working, and the taillight harness seems good as the emergency flashers work as they go through the same circuit. Any ideals why I lose voltage when connector the connector under the dash of the taillight harness? I'm sure it's something simple I am missing.

18
Regional Shows and Events / SVRA COTA
« on: November 08, 2021, 11:05:33 AM »
Several Shelby’s running the SVRA event in Austin this weekend.

19
Appeals / Ford X Plan Number
« on: November 06, 2021, 10:52:47 AM »
Anyone have a Ford X Plan PIN for a new truck purchase? Thanks

20
Appeals / Help with '89 Bronco 4wd in Houston Area
« on: October 08, 2021, 10:53:47 AM »
I have a friend that needs the vacuum actuated 4wd system reinstalled on an '89 Bronco in the West Houston area. Anyone know a shop? Thanks.

21
Wanted to Buy / 1967 Thermostat Housing
« on: August 04, 2021, 06:19:42 AM »
I need the one year only 1967, small thermostat, housing. It doesn’t have the threaded hole. Thanks

22
Wanted to Buy / C6 Cooling Line Fitting
« on: July 30, 2021, 08:33:09 AM »
Looking for this fitting for a 67 500 C6. Sealed with an o-ring.

23
Wanted to Buy / Magstar for Spare - Reproduciton or Original
« on: July 12, 2021, 08:55:48 PM »
Looking for a 1967 Magstar. Reproduction or original, as long as decent shape. Not looking for perfect, but good driver condition. What do you have? Thanks

24
SAAC Forum Discussion Area / '69 GT 350 Battery Question
« on: October 12, 2020, 05:32:06 PM »
Does the call out on a Marti Report of "Heavy Duty Battery" option for a '69 Shelby GT 350 mean the car came with a Group 27 battery? Thanks.

25
Since the other Autolite battery thread was locked (Why?), I thought I would add my experience. I ordered from Jegs (Free Shipping!). Turbo Start paper work is in the box. No damage upon arrival, but the plastic bag the battery was in contained fluid and the shipping box was wet. I called Jegs (on hold for 30+ minutes) and they said they would send another, but they were not in stock so it would be awhile. I said no, just refund and send a call tag for the return battery. Jegs said keep the battery and they would credit me in 3-5 business days. Sounds like manufacturing has not quite got a good quality process yet, and Jegs seemed to know this is an issue.

26
Parts For Sale / Front Koni Shocks
« on: September 16, 2020, 08:45:24 AM »
Set of modern Koni shocks I took off my '65 and replaced with originals. Excellent with less than 5K miles. $150 plus shipping. I'll have the rears too when I install the originals.

28
SAAC Forum Discussion Area / Help ID PS Pulley
« on: August 02, 2020, 02:42:49 PM »
What is the application for power steering pulley D00R-B.  Also is stamped with an S and is 6.25" in diameter. Just pulled it from a pump dated 9W9? Thanks.

29
Parts For Sale / 1965 Shelby GT 350 Tach - Reproduction
« on: July 21, 2020, 07:30:41 PM »
Excellent repro ‘65 GT350 tach. $350 shipped.

30
SAAC Forum Discussion Area / Tulsa Mid-America Meet Cancelled?
« on: May 21, 2020, 02:36:29 PM »
I just called the Tulsa Marriott to make a reservation and they said Mid-America Ford Meet is cancelled. Anyone else confirm?

Pages: 1 [2] 3