News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - SFM6S1348

#16
Hi Brian,

Any markings on the intake? I find none on mine.  IIRC, I have heard some had BUDDY BAR markings, but I could be mistake.  I have not been able to find much info on these set ups on the internet.  Mustangtek list this set up with no markings under intake manifolds.

Cory
[/quote]

I have a Tri-Power on 6S1348 that I put on in the 80's. As I remember it had BUDDY BAR in the bottom. I do admit that was about 35 years ago so I may be wrong. There is a date marking of 9 64 cast into the top of the thermostat housing on the outside.
Here are the numbers. I will have to look again for two of the metering blocks.
There were no tags on the carbs when I got them. I have had five sets of carbs over the years and do not remember any carb tags. Of course that does not meany any thing.

Part Number
Front C4AF-9510-V List 2882
Middle  C4AF-9510-U List-2881
Back C4AF-9510-V List 2882

Date Number
Front 502
Middle 584
Back 502

Metering block
Numbers
Front
Middle 3673
Back

Hope this is helpful...

Les

#17
I have used Dot 5 in 6S1348 for about the past 25 years with no problems.

Les
#18
1966 Shelby GT350/GT350H / Re: 2170 in U.K.
May 07, 2018, 09:03:15 AM
Yea to you and 2170...

Les 6S1348
#19
1966 Shelby GT350/GT350H / Re: glass date code
March 31, 2018, 03:40:17 PM
Quote from: poboy427 on March 31, 2018, 10:54:14 AM
Les,  I would be interested in knowing what the letter in the circle just above the date code reads, I have tried enlarging. Mine is a N for Nashville. I have only seen the M05 on two 66 Shelby's and was wondering if it is SJ related only? The other FM codes don't seem to relate to any certain assy plant. My research tells me that the middle character is a zero and not an "O". Mike at PS Glass was going to check with Bob Perkins to see what he knew about FM-M05.

Ray

Took a new picture and it look like a N for Nashville.

Les



#21
1966 Shelby GT350/GT350H / Re: glass date code
March 30, 2018, 01:35:41 PM
I found this on the web:
http://www.mustangandfords.com/how-to/paint-body/1509-how-to-correctly-identify-early-glass-for-mustangs-cougars/
Marcus Anghel
September 29, 2015

This explains some things but does not answer the windshield M05 number in the information.It answers the wind wing M30 however.

Les 6S1348
#22
1966 Shelby GT350/GT350H / Re: glass date code
March 30, 2018, 12:46:36 PM
Quote from: poboy427 on March 30, 2018, 12:03:44 PM
Les or anybody know what the FM-M05 indicates. I know it is a Ford Motor number but can't find much about it and I've now seen it on your shelby and mine

Ray

I don't know but my wind wing glass is M30.

Les
#23
1966 Shelby GT350/GT350H / Re: glass date code
March 30, 2018, 10:34:38 AM

Quote from: 6s2020 on March 29, 2018, 05:53:17 PM
Yes, year-month as in 6A would be Jan 66

Original to 6S1348- 6 B

Les

#24
FYI 6S1348 glass dates...Not Tinted
I can not read the door glass dates. Windshield is 6B, right wind wing 6A, and the left wind wing is 5L
Pictures will follow.

Les





#25
Quote from: SFM5S000 on March 22, 2018, 12:49:32 PM
I have an NOS one (1), I use to have a pair but they got separated. I saw the single a few days ago as I was going to post a pic for the other post regarding 66 sills. As soon as I scare it up I'll post the pic. Even better if I can find the matching other.

Cheers
~Earl J

I would be interested in 1 as well as 2...

Leslawrence@cox.net

Les 1348
#26
Quote from: gt350hr on March 22, 2018, 02:07:30 PM
If Bob can't supply them I might. BTW there are two different pressure values on later ones too. 80 and 90.

Please advise...

Les 1348
#27
Wanting to buy original 1966 sill plate emblems NOS or used. Original used sill plates with emblems would be fine. The parts are for 6S1348 a original paint and interior driver. I took the originals off in the 1980's and replaced them with NOS sill plates and repo emblems. The originals went up in my garage, but 20 years later I could not find them. I have been caretaker of this car for 35 years and because it is mostly original I want to keep it that way as much as possible.
Thank You,
Les 6S1348

http://www.saacforum.com/gallery/394-230118124644.jpeg
#28
Quote from: J_Speegle on March 21, 2018, 04:35:41 AM
Still going through pictures. Have them for about 50% of the cars in one form or another so taking some time.

Here is the picture of what was on the wife's car.  Same picture I posted last time.  Knowing Doug he never replaced them and what was in the car when I first road in it in 73



Two line version

What number was the wife's car?
#29
Quote from: J_Speegle on March 20, 2018, 02:04:14 PM
Will go through my files and pictures and repost what I posted (or close to ) last time showing the two styles I've found over the years.

That would be great.

Thanks

Les
#30
Here is what 1348 has on it presently. In 1980's I replaced the beat up sill plates with NOS Ford and Repo (?) Shelby emblems. I stored the originals in my garage but they went somewhere else. I could not find them when we moved. I noted the 1967 discussion was very informative about 1967 and hope similar information can be obtained here about the 1966 cars.
Les 1348