SAAC Forum

Original bushing here (not mine);

https://www.ebay.com/itm/NOS-FORD-B8QH-12120-A-Distributor-Upper-Shaft-Bushing-289-302-352-390-427-428/382679816810?hash=item59197e9a6a:g:CPcAAOSwsn9cGUjz:rk:9:pf:0

I have used Jackson Speaker Service in Jackson, MI several times and been very satisfied.  Here is some very old info; can't guarantee it is current but I think he advertises in Hemmings.

Jackson Speaker Service, 3921 Pinecrest Ct, Jackson, MI 49203, 517-789-6400; email: rjmcgee@voyager.net

I understand there is now a version produced by Alloy Metal Products that is better.  Check with them.

Marcus has some;

http://anghelrestorations.com/parts.html

I see that WCCC has the pulley on their website.

https://secure.cougarpartscatalog.com/c7az-3a733-7aa.html

I believe this to be the Odyssey PC925MJT battery, which retails for $200+.  Not much savings here buying one of these and DIY'ing the job versus just buying another repro.  Most recently, I have been using the battery linked below.  It does a pretty good job and lasted 2-1/2 years.  Cost is about $110.  The catch with this one is it is too tall for the case by just a tiny bit.  I cut a hole in the bottom of the case just the size of the battery and glued a piece of Masonite on the bottom.  The difference in thickness between the case material and the masonite was enough to allow the top of the battery to just clear so you can reinstall the lid.

https://www.azbatterystore.com/Power-Sport_Batteries-12_Volt_30_Amp_High_Performance_Sealed_Battery.html

Quote from: Don Johnston on October 31, 2018, 10:40:34 PM
What does the inner battery have printed on it?

Yes!  How about a picture of the label on the battery please?

Quote from: Blackcar on September 08, 2018, 10:33:11 PM
One was at the 50th CJ reunion along with 5 regular models.

And that one had the CF wheels.

I have a NOS in the box 1966 grill that was damaged in transit to me - maybe?  Anyway, when it arrived, it had some damage so I just set it aside.  This is the correct early style with the blind rivets.  It had fog light brackets mounted before I got it - see the paint witness marks.  One photo shows a closeup of the damaged area.  The center part is bent a little and some of the vertical bars are broken from the horizontal rib.  I think bending it back in place here would make most of these breaks invisible, but I am not going to try.

$150 plus shipping from 28721.

Please provide more info on the CJ radiator via email.  See my profile.  Also, where are you located?