I bought these from Forum member, John Guinta. They were on his car for a number of years. Unfortunately, my car has a scatter shield, so they will not fit. II also have Canfield heads, so even without the scatter shield, they were not going to fit in 6S2166, so they are for sale. I tried the passenger side first, no luck, so I stopped. John told me that he used them in his R model Tribute car. The engine stand picture, is from John.
Here is Herb Geblers info, he was the primary header builder for the King, Richard Petty
https://www.google.com/search?rlz=1CAKSOU_enUS801&sxsrf=ALeKk00BF6CnwEyaMQXxKZEekA06qv7mlg%3A1587304435212&ei=81ecXqXJDO-N_QaXuqeYDA&q=herb+gebler++headers++&oq=herb+gebler++headers++&gs_lcp=CgZwc3ktYWIQAzIECCMQJ1CsclideGCvfmgAcAB4AIABXIgBzwWSAQE5mAEAoAEBqgEHZ3dzLXdpeg&sclient=psy-ab&ved=0ahUKEwjljovo0fToAhXvRt8KHRfdCcMQ4dUDCAw&uact=5
Stainless long tube design, per John, they will fit a non scatter shield car. I added 8 Auto Meter 5254 EGT pyrometer at a cost of 400.00, then had them expertly installed, at another 300.00. I have 2300.00 into thee beautiful headers, that i cannot use. Here is the kit I used.
https://www.amazon.com/Auto-Meter-5254-Pyrometer-Fitting/dp/B00062YXQY
So, I would like to sell them and have them used ! Please refer any particular questions to John at John Guinta
j.guinta1@comcast.net
312.315.7350
They are a work of art. I am so dissappointed, but onward we go. They have beautiful flanges, as well as separate individual flanges if you want to go with individual tubes. Close tolerance stainless steel bolts included as well.
Call to discuss, Dan Cundiff 239-537-4369 E mail drcundiff1@aol.com
$2100.00 seems fair, but I am open to offers. Thank you for looking.
Here is Herb Geblers info, he was the primary header builder for the King, Richard Petty
https://www.google.com/search?rlz=1CAKSOU_enUS801&sxsrf=ALeKk00BF6CnwEyaMQXxKZEekA06qv7mlg%3A1587304435212&ei=81ecXqXJDO-N_QaXuqeYDA&q=herb+gebler++headers++&oq=herb+gebler++headers++&gs_lcp=CgZwc3ktYWIQAzIECCMQJ1CsclideGCvfmgAcAB4AIABXIgBzwWSAQE5mAEAoAEBqgEHZ3dzLXdpeg&sclient=psy-ab&ved=0ahUKEwjljovo0fToAhXvRt8KHRfdCcMQ4dUDCAw&uact=5
Stainless long tube design, per John, they will fit a non scatter shield car. I added 8 Auto Meter 5254 EGT pyrometer at a cost of 400.00, then had them expertly installed, at another 300.00. I have 2300.00 into thee beautiful headers, that i cannot use. Here is the kit I used.
https://www.amazon.com/Auto-Meter-5254-Pyrometer-Fitting/dp/B00062YXQY
So, I would like to sell them and have them used ! Please refer any particular questions to John at John Guinta
j.guinta1@comcast.net
312.315.7350
They are a work of art. I am so dissappointed, but onward we go. They have beautiful flanges, as well as separate individual flanges if you want to go with individual tubes. Close tolerance stainless steel bolts included as well.
Call to discuss, Dan Cundiff 239-537-4369 E mail drcundiff1@aol.com
$2100.00 seems fair, but I am open to offers. Thank you for looking.
