News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu
Menu

Show posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Show posts Menu

Messages - Shelbypat

#61
Quote from: Tor on March 10, 2021, 06:42:47 PM
Hello
My 70 conv (1014) has FAA Black clarion knit/corintian vinyl hi-back bucket seat, no red stripe

Hi Tor. What color is yours stripes ?
#62
Could 4A be for high back bucket ( head rest style ) and 7A for bucket seat?
#63
First, what is the  problem.
Brake bulb doesn't illuminate when you apply parking brake ? Or ?

Note that brake and parking brake switch wires are both  green and red. The terminal for parking brake switch has rubber around it.
Patrick
#64
On Deadnutson web site they offer Dill stems valves kit and there is a picture that show a old original beside and it seems to be identical.

Patrick
#65
What was the masking tape purpose ?

Patrick
#66
Replicas and Tribute / Tri-y question
December 06, 2020, 09:27:04 PM
Hi. I am helping a friend want to install headers on is 67 289 tribute.
Is one tri-y headers brand exist in the market that doesnt nead to lowered the Power steering cylinder bracket ?
TKS
Patrick
#67
1969-1970 Shelby GT350/500 / Re: Sequential Box hook
December 02, 2020, 05:32:25 PM
From rip forum.
Others may comment as I dont know the historical of the car. BTW It is what a used to duplicate when I welded mine.

Patrick
#68
1969-1970 Shelby GT350/500 / Re: Sequential Box hook
November 30, 2020, 09:01:32 AM
I dont have the answer but just want to advise you there suppose to have a 3/4 " foam stuck behind the sequential module .Something to consider before you weld .This topic has been raised in the past but I dont find it.

Patrick
#69
Thank you. And how about the wire for the light coming from the shifter. How does It  hold aside or Along the floor to the connector ?

Patrick
#70
1969-1970 Shelby GT350/500 / C6 neutral switch question
November 23, 2020, 08:43:52 AM
How the neutral switch harness hold on his way up to the connecter? (Surely not with tyrap to the brake line.)
If my memory is not bad, there is a P clamp hold the harness at the upper bolt of switch. What kind of  clamp is it ? Like the one on valve cover ?
Is It avalible ?

TKS
Patrick
#71
1969-1970 Shelby GT350/500 / Re: OIL PRESSURE gauge
October 18, 2020, 06:28:53 PM
And make sure the engine has a good ground.

Patrick
#72
1969-1970 Shelby GT350/500 / Re: OIL PRESSURE gauge
October 18, 2020, 03:51:46 PM
If the aftermarket reading is not better, I woul'd install a T behind sending unit and tape a mecanical gage on the windshield to compare on roadtest. 

Patrick
#73
1969-1970 Shelby GT350/500 / Re: Cooling problems
September 29, 2020, 09:38:44 PM
Does it overheat with a/c off ?
If the high side is over 250 psi, condensor will contribute to warm the rad insteed of cool it

Patrick
#74
1969-1970 Shelby GT350/500 / Re: Cooling problems
September 29, 2020, 05:29:59 PM
Be sur condenser and rad are clean and free of air circulation.  You can jet them carefully with water garden hose and retest.

Patrick
#75
9 or 7 first letter ?