Im not sure if my Z bar is bent. Does anyone know if someone makes a stronger Z bar or a way to reinforce one so it doesn’t bend? I have to almost push the pedal through the floor to get the clutch to engage so I can shift into gear. I used the procedure in the shop manual but my pedal always has to be pushed all the way to the floor to shift. Is there a way to adjust the lower rod to make it disengage closer to the top of the pedal travel and still have enough free play? Also I installed a Center force clutch and pressure plate and throw out bearing and cannot get the pedal to come all the way up without assistance. I had to put a heavier spring to the Z bar from the firewall in order to get the pedal to come full up. Thanks in advance for any help you can give
Dan