Author Topic: 289 Windsor 4V Hi Po heads  (Read 950 times)

odgt350

  • Newbie
  • *
    • View Profile
289 Windsor 4V Hi Po heads
« on: August 28, 2022, 04:07:55 AM »
Hi to all in the SAAC Club.

Rob from Melbourne , Australia and i would  like some help if possible. I am in need of a pair of  289 Windsor 4V Hi Po heads , for my 66 original Hertz .I have no.20 on both heads outside raised  .
Is it true 19 20 21 were used .
My car is a high no. car with a Origanal PAXTON date code .
In desoerate need .
I would appreciate any help .

Kind regards Rob 

J_Speegle

  • SAAC Member
  • Hero Member
  • *
  • Just here to help :)
    • View Profile
    • ConcoursMustang.com
Re: 289 Windsor 4V Hi Po heads
« Reply #1 on: August 28, 2022, 05:47:19 PM »
Yes the numbers 19, 20, & 21 cast above the mounting hole is an external, with heads on engine and valve covers installed, clue that the heads are likely original Hipo heads. Some service heads did not have this feature.

Always double check the other features that should accompany this details since some have taken it upon themselves to fake heads by adding the number to non-HiPo heads in some rare examples

« Last Edit: August 28, 2022, 05:59:01 PM by J_Speegle »
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

odgt350

  • Newbie
  • *
    • View Profile
Re: 289 Windsor 4V Hi Po heads
« Reply #2 on: August 29, 2022, 05:23:35 AM »
Ok thanks for your help.

I was trying to attach photos of the heads i have with no.s and cracks .But for some reason from phone to this message won't happen .

odgt350

  • Newbie
  • *
    • View Profile
Re: 289 Windsor 4V Hi Po heads
« Reply #3 on: August 29, 2022, 05:27:18 AM »
Also I've only posted 3 times before on site .
Have been a member since 2009 , and have been to 3 Shelby Nationals in the USA.
Regards Rob.