Author Topic: Condensers for dual point?  (Read 428 times)

csxsfm

  • Full Member
  • ***
  • Posts: 101
    • View Profile
Condensers for dual point?
« on: February 24, 2021, 10:23:28 PM »
What's the best performing/reliable condenser currently available as an alternative to the chinese junk?

6s1640

  • Hero Member
  • *****
  • Posts: 801
    • View Profile
Re: Condensers for dual point?
« Reply #1 on: February 24, 2021, 10:42:48 PM »
NAPA sells   ECH FA66 ($17.49) that I have had good luck with.  The mounting bracket is loose, but does center the device.  You can still get Motorcraft condensers.

This link will take you to five for sale at $9.99 each with bracket integral to device.

https://www.ebay.com/itm/289-HiPo-Boss-302-NOS-MOTORCRAFT-DC-6-Dual-Point-Condenser-7RA-12300-C/254839384402?epid=1338923678&hash=item3b559c6952:g:cgcAAOSwFSpgB6kb

Best of luck

Cory
« Last Edit: February 25, 2021, 01:33:51 AM by 6s1640 »

gt350hr

  • Hero Member
  • *****
  • Posts: 2107
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: Condensers for dual point?
« Reply #2 on: February 25, 2021, 10:56:24 AM »
  Originals. PM me if you need one . I have one or two NOS.
Celebrating 46 years of drag racing 6S477 and no end in sight.

Speed Six

  • SAAC Member
  • Jr. Member
  • *
  • Posts: 53
    • View Profile
Re: Condensers for dual point?
« Reply #3 on: February 25, 2021, 12:35:04 PM »
In my experience the best condenser available is this one : https://swiftune.com/parts-shop/ignition/swiftune-competition-condenser-2.html
They explicitly developed it for racing engines and as much better and more reliable alternative for all the aftermarket copies.
I had a lot of condensers fail in my pre war racer, since using the Swiftune one (since 2010 now, without change !) no more problems.
Highly recommended - and I am not affiliated or get free ones !  ;D


shelbydoug

  • SAAC Member
  • Hero Member
  • *
  • Posts: 3986
    • View Profile
Re: Condensers for dual point?
« Reply #4 on: March 08, 2021, 09:57:56 AM »
I would think that a Standard brand would be fine for this application.
68 GT350 Lives Matter!