News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

351 choke tube photo

Started by Coralsnake, February 28, 2021, 04:37:31 PM

Previous topic - Next topic

Coralsnake

Anyone have a photo of 69 GT350 choke tubes at exhaust manifold?
The original Influencer, check out www.thecoralsnake.com

KShane

The pic is from #1256 a 34K mile unrestored car.
If you need a different angle or view let me know.
Shane



Bob Gaines

A Interesting unrelated observation is that I don't see any lift hooks .That is more typical on a 69/70 GT350 from others I have seen . Even though there were factory directions to remove them I believe extra effort was given to the Shelby for removal because they were unsightly and would detract from the "dressup" Shelby items on the engine.   
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Coralsnake

#3
Thank you, that is helpful

Im trying to rehab the choke tubes and was wondering what direction the hole in the bottom steel plug faces?

Towards firewall, towards apron or towards front of car?
The original Influencer, check out www.thecoralsnake.com

J_Speegle

Quote from: Coralsnake on March 01, 2021, 01:44:38 PM
Thank you, that is helpful

Im trying to rehab the choke tubes and was wondering what direction the hole in the bottom steel plug faces?

Towards firewall, towards apron or towards front of car?

Believe its towards the engine side. Provides more side clearance and less chance of hanging up on something or getting in the way
Jeff Speegle- Mustang & Shelby detail collector, ConcoursMustang.com mentor :) and Judge

Coralsnake

The original Influencer, check out www.thecoralsnake.com

Coralsnake

Hopefully this helps someone else...

The original Influencer, check out www.thecoralsnake.com

SChatman

Have any of you gotten a set of the reproduction choke tubes and put them on, start the car and the white woven  insulation melted and dripped goo on the exhaust manifold? I have, any recommendations  for the correct insulation?
Thanks

Bob Gaines

Quote from: SChatman on April 12, 2021, 02:38:29 PM
Have any of you gotten a set of the reproduction choke tubes and put them on, start the car and the white woven  insulation melted and dripped goo on the exhaust manifold? I have, any recommendations  for the correct insulation?
Thanks
Original asbestos material was outlawed many years ago the fiberglass material used now doesn't look the same and is more prone to melting.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby