News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

GT350 Throttle Rod and Spring

Started by Bossbill, March 29, 2021, 12:36:34 PM

Previous topic - Next topic

Bossbill

I'm having trouble finding the details of the throttle rod and spring on 67 GT350s.

What few pictures exist this close in suggest that we are using a stock 289 throttle rod (dull zinc) and the stock 289 4V spring and bracket.

A pic of the MPC illustration of those parts is included.
With full accreditation to Jeff Speegle and Concoursmustang.com I've blown up the only picture I've found of this area.
Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx

Bob Gaines

Quote from: Bossbill on March 29, 2021, 12:36:34 PM
I'm having trouble finding the details of the throttle rod and spring on 67 GT350s.

What few pictures exist this close in suggest that we are using a stock 289 throttle rod (dull zinc) and the stock 289 4V spring and bracket.

A pic of the MPC illustration of those parts is included.
With full accreditation to Jeff Speegle and Concoursmustang.com I've blown up the only picture I've found of this area.
It looks like you think you are having more trouble then you actually are. What do you think the other details are that you missing ?
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bossbill

My throttle rod was replaced with something else.
My bracket is AWOL and judging by the springs I have in the "removed from car" bin I don't have the right spring.
The Shelby Assy Manual doesn't have this detail.
The pic looks like it might have the 289 bracket, but the bracket is bent at an odd angle.
I have other pics of some kind of bracket installed but placed even more oddly than the one pictured.

If this is just 289 4V stuff, great.

Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx

Bob Gaines

Quote from: Bossbill on March 29, 2021, 05:49:37 PM
My throttle rod was replaced with something else.
My bracket is AWOL and judging by the springs I have in the "removed from car" bin I don't have the right spring.
The Shelby Assy Manual doesn't have this detail.
The pic looks like it might have the 289 bracket, but the bracket is bent at an odd angle.
I have other pics of some kind of bracket installed but placed even more oddly than the one pictured.

If this is just 289 4V stuff, great.
For a 67 GT350 it is. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Bossbill

Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx

Skidado

The throttle linkage on #2751 has been modified to add a spherical joint at the carb end, but the rest of the linkage is stock. The spring bracket is a little different to the one shown above but looks similarly goofy!

It has a small anti-rotation tab along the edge, but I don't see how this could possibly prevent rotation.

Hopefully I have attached a picture that shows what I mean.

David

Bossbill

Looks like many wanted to improve on this design. Like mine.
If you take the original apart without paying attention the retention of the spring by the 90 degree bend doesn't look right on reassembly.
Bill

67 GT350 Actual Build 3/2/67  01375
70 B302   6/6/70  0T02G160xxx