Author Topic: '91-'93 SHELBY / SAAC -Engine Dress Parts  (Read 280 times)

Richstang

  • Hero Member
  • *****
  • Posts: 2082
    • View Profile
    • 1967 Shelby Research Group
'91-'93 SHELBY / SAAC -Engine Dress Parts
« on: April 18, 2021, 11:51:06 AM »
Found some older write-ups from forum 1.0. Might as well repost them instead of getting lost forever.

“SHELBY” lettered parts - SAAC MKI:

These were only included on the first 13 built cars. Afterwards, they switched to all the “SAAC” lettered parts for production. Both versions were available through the SAAC Parts Company
#SAAC -6582-MKIA =“SHELBY” lettered Valve Covers

#SAAC-9E434-MKI =“SHELBY” lettered GT40 Intake Manifold Top Plate

#SAAC-9E433-MKIA =“SHELBY” lettered Mustang Intake Manifold Top Plate
(The Mustang Intake Manifold Top Plate was never used on a SAAC MKI or MKII)



« Last Edit: April 18, 2021, 12:14:37 PM by Richstang »
1967 Shelby Research Group 
www.1967ShelbyResearch.com
www.mewe.com/join/1967shelbyresearch
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

Richstang

  • Hero Member
  • *****
  • Posts: 2082
    • View Profile
    • 1967 Shelby Research Group
Re: '91-'93 SHELBY / SAAC -Engine Dress Parts
« Reply #1 on: April 18, 2021, 11:51:19 AM »
“SAAC” lettered parts - SAAC MKI, MKII, & SNAKE:

These were the typical production parts included throughout production. 
#SAAC -6582-MKII = “SAAC” lettered valve covers
(Only a few SAAC SNAKES had this option, most had standard Mustang valve covers)

#SAAC-9E434-MKII = “SAAC” lettered GT40 intake manifold top plate
(I have seen the actual part with the number; SAAC-9E934-MKIA)

#SAAC-9E433-S = “SAAC” lettered Mustang intake manifold top plate is listed as part number;
(These were only used on the SAAC Snake without the upgraded engine option)

« Last Edit: April 18, 2021, 12:14:07 PM by Richstang »
1967 Shelby Research Group 
www.1967ShelbyResearch.com
www.mewe.com/join/1967shelbyresearch
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar

Richstang

  • Hero Member
  • *****
  • Posts: 2082
    • View Profile
    • 1967 Shelby Research Group
Re: '91-'93 SHELBY / SAAC -Engine Dress Parts
« Reply #2 on: April 18, 2021, 11:51:32 AM »
Oil Filler Cap

The “CS” lettered oil fill cap was only included on the first 13 MKI cars built
(It was placed on a 14th car, completed for sale later, prior to the sale: CX1). 

The “OIL” lettered oil fill cap was only put on one car, MKII 004.

For the remainder of production, they were switched to three digits of the actual car number
Only the “CS” oil cap was available from the SAAC Parts Company.
#SAAC-3200-A = “CS” oil filler cap (CS=Carroll Shelby)

« Last Edit: April 18, 2021, 12:13:21 PM by Richstang »
1967 Shelby Research Group 
www.1967ShelbyResearch.com
www.mewe.com/join/1967shelbyresearch
www.facebook.com/groups/1967shelbyresearch

1991-1993 SAAC MKI, MKII, & Snake Registrar