News:

SAAC Member Badges are NOW available. Make your request through saac.memberlodge.com to validate membership.

Main Menu

1967 Shelby In-board Lights Wiring Harness Clip

Started by 67GT500#1594, May 26, 2021, 01:50:40 PM

Previous topic - Next topic

67GT500#1594

I cannot find any images out there, anywhere, on this wiring harness clip. This is based off of my memories but does this clip look correct? Any details or dimensions of an original or pics? I've reached out to a few here but no responses yet?

Thanks!!
Matt

JD

Nick "1690" on this forum has had some made, below is a link to send him a PM and see if he still has some.

https://www.saacforum.com/index.php?action=profile;u=131

also discussed here;
https://www.saacforum.com/index.php?topic=893.msg25409#msg25409

Looks like these images...
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

S7MS427

So those are inboards.  What did outboards use and where were they placed?
Roy Simkins
http://www.s-techent.com/Shelby.htm
1966 G.T.350H SFM6S817
1967 G.T.500 67400F7A03040

Bob Gaines

Quote from: S7MS427 on May 26, 2021, 03:28:08 PM
So those are inboards.  What did outboards use and where were they placed?
The outboards have a short piece of black and green wire pigtail that is attached at the same point on the headlight harness as the inboards. The outboards don't require a clip for its short run of wire.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

67GT500#1594

Thanks JD!!

I've tried to PM 1690. I'll try again. Many thanks for the pics! That helps a ton! I found when blasting mine the original area and adhesive residue was much larger than what I found as pictured. 👍👍👍

S7MS427

Quote from: Bob Gaines on May 26, 2021, 03:39:47 PM
The outboards have a short piece of black and green wire pigtail that is attached at the same point on the headlight harness as the inboards. The outboards don't require a clip for its short run of wire.
That explains why I don't have them.  Thanks Bob.
Roy Simkins
http://www.s-techent.com/Shelby.htm
1966 G.T.350H SFM6S817
1967 G.T.500 67400F7A03040

JD

...also, not all inboard cars got these Shelby added clips, the very early cars didn't have them.  Car #112 does have them, but remember Shelby completion dates factor into this (again) and even that isn't always "gospel"!!
'67 Shelby Headlight Bucket Grommets https://www.saacforum.com/index.php?topic=254.0
'67 Shelby Lower Grille Edge Protective Strip https://www.saacforum.com/index.php?topic=1237.0

Bob Gaines

Quote from: JD on May 26, 2021, 09:32:42 PM
...also, not all inboard cars got these Shelby added clips, the very early cars didn't have them.  Car #112 does have them, but remember Shelby completion dates factor into this (again) and even that isn't always "gospel"!!
Yes and to expand , the earliest cars had a zip tie used to hold the wire at the hood latch support. The same type used for oil pressure line or amp gauge wire at the export brace.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

rmarble57

Ahhhhhhhhhh......................I wondered why I had Zip Ties on #23

1690

Hi Everyone...I have not been here in awhile so I'm sorry for the late response. I'll have to have more made, but it doesn't take long. I'm not sure if they require a minimum order.

Can I get everyone to reply how many they need? I'll probably have you pay in advance so I don't get stuck.

Thank you,
Nick

cbrown

1960.  I need three sets please.   

cbrownmustangs@hotmail.com if you need any info.

chris

s_eagle

2 sets for me if you plan on having more made.  Thanks

Rob
s.eagle.ll@gmail.com

KShane

#12
I need two sets.
Thanks
Shane
Ksfdds03@gmail.com

T-Bone68