Author Topic: Holley atmospheric Vent "button"  (Read 1579 times)

hurlbird

  • Sr. Member
  • ****
    • View Profile
Holley atmospheric Vent "button"
« on: August 24, 2021, 07:51:49 AM »
The little vent on the front bowl that is covered by the "button/cap" on the arm seems to be missing the rubber sealer. Can i just glue another on the button or can i buy a new button with the rubber on it? i dont find anything on line. Thanks

Mike Laucks

  • Newbie
  • *
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #1 on: August 27, 2021, 04:54:39 PM »
Hello, I had my original GT350 4 sp  CARB rebuilt by Steve Carburetor in NJ he did a great job & he replaced the breather , he may have some for sale office # 201-935-3499
here is pic, if this isnt what you were looking for sorry about that.

good luck

Mike
67 500 #0927
68 350 #3370

Mike Laucks
C 717-577-6968

hurlbird

  • Sr. Member
  • ****
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #2 on: August 27, 2021, 05:26:32 PM »
thank you

98SVT - was 06GT

  • SAAC Member
  • Hero Member
  • *
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #3 on: August 27, 2021, 05:46:59 PM »
That part comes in most Holley rebuild kits. Or check Holley's web site and see if they have them separately. Yours sounds like the ones with a different arm with a steel washer and no rubber.
Previous owner 6S843 - GT350H & 68 GT500 Convert #135.
Mine: GT1 Mustang Track Toy, 1998 SVT Cobra, Wife's: 2004 Tbird
Member since 1975 - priceless

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Original Posts:14706
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #4 on: August 27, 2021, 10:16:07 PM »
The ones in the Holley kits will work but are different then the assemblyline vent caps. I posted a picture of a what a assemblyline version looks like.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

gt350hr

  • Hero Member
  • *****
  • Randy Gillis in real life - 5353 original posts
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #5 on: August 30, 2021, 11:28:24 AM »
     I bought a package of ten exact reproductions off of epay. I don't have a link as it was months ago when I bought them. The orange parts in kits are for accelerator pump "one way valves" on specific float bowls.
Celebrating 46 years of drag racing 6S477 and no end in sight.

Drew Pojedinec

  • Sr. Member
  • ****
    • View Profile
Re: Holley atmospheric Vent "button"
« Reply #6 on: August 30, 2021, 11:37:37 AM »
     I bought a package of ten exact reproductions off of epay. I don't have a link as it was months ago when I bought them. The orange parts in kits are for accelerator pump "one way valves" on specific float bowls.

Mile Bolduc sells them on ebay. I buy a handful every once in awhile.