News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

428 pi block engine 1967 A scratch

Started by Sportyworty, January 06, 2022, 12:03:05 AM

Previous topic - Next topic

Sportyworty

A scratch blocks with triple web were cast 7B-7E. Prior dated 428 castings are single web A scratch and castings dated after were C scratch continuing with triple web.
The Craigslist block is pre reinforced crank saddle (triple web)
Kerry

68blk500c

Quote from: Sportyworty on January 06, 2022, 12:03:05 AM
A scratch blocks with triple web were cast 7B-7E. Prior dated 428 castings are single web A scratch and castings dated after were C scratch continuing with triple web.
The Craigslist block is pre reinforced crank saddle (triple web)
Kerry

Good info., Kerry.  Glad you are back.

shelbydoug

#2
Quote from: Sportyworty on January 06, 2022, 12:03:05 AM
A scratch blocks with triple web were cast 7B-7E. Prior dated 428 castings are single web A scratch and castings dated after were C scratch continuing with triple web.
The Craigslist block is pre reinforced crank saddle (triple web)
Kerry

What are you calling "triple web reinforcing"? This is my A block. 7E31.

It was just the current evolution of 428 blocks at that point. The cast in gussets have nothing to do with reinforcing the mains. They are supports for the pan rails.

You would need to tie those to the main caps like 427 blocks have to have any effect and that isn't terribly significant at all. A girdle tying that all together is a different story.
68 GT350 Lives Matter!

5s127

This is the area with the extra support.

Sportyworty

Thanks for the welcome
I should have said A scratch blocks with reinforced web were dated Nov 66 through May 67 NOT 7B-7E.
Misquoting my own printed data. ::) it's all down hill from here  :)


https://www.428cobrajet.org/id-block

shelbydoug

Quote from: Sportyworty on January 06, 2022, 11:02:15 AM
Thanks for the welcome
I should have said A scratch blocks with reinforced web were dated Nov 66 through May 67 NOT 7B-7E.
Misquoting my own printed data. ::) it's all down hill from here  :)


https://www.428cobrajet.org/id-block

We thought that you were just on sabbatical? Welcome back.  ::)
68 GT350 Lives Matter!

pbf777

Quote from: shelbydoug on January 06, 2022, 09:17:26 AM
The cast in gussets have nothing to do with reinforcing the mains. They are supports for the pan rails.


      :o   Sorry, I'm a little slow sometimes (most of the time actually  ::) ) and maybe I missed it, so I'm just checking, but is this meant to be 'dry-humor' ?   :-\

       Scott.

shelbydoug

Gussets are the triangular pieces that project up the sides from the caps. They are just supporting the sides of the block, not the caps.  ;D
68 GT350 Lives Matter!

gt350hr

     The additional internal ribs which later became standard on the C scratch blocks are fully acknowledged by retired Ford Engine engineers as "re enforcing ribs" added for "torsional rigidity" on increased power output engines. Cross bolting as Doug referred to was done ( mainly 427 blocks) for long distance extended high rpm use where the harmonic levels in the narrow RPM band "shook" the main webs to the point of failure. (read NASCAR) This wouldn't happen in a passenger car because of the lower rpm/ power output not causing the harmonic.
     Kerry is correct in his description.
Celebrating 46 years of drag racing 6S477 and no end in sight.