News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

valve cover bolts

Started by shelbymann1970, March 01, 2022, 01:52:18 PM

Previous topic - Next topic

shelbymann1970

Do the 68s use the RWB bolts or the plain bolts like 1969-70.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)

TLea

Quote from: shelbymann1970 on March 01, 2022, 01:52:18 PM
Do the 68s use the RWB bolts or the plain bolts like 1969-70.
Yes.
Early cars plain. Later cars rbw

shelbymann1970

Quote from: TLea on March 01, 2022, 08:06:20 PM
Quote from: shelbymann1970 on March 01, 2022, 01:52:18 PM
Do the 68s use the RWB bolts or the plain bolts like 1969-70.
Yes.
Early cars plain. Later cars rbw
Thanks.
Shelby owner since 1984
SAAC member since 1990
1970 GT350 4 speed(owned since 1985).
  MCA gold 2003(not anymore)
1969 Mach1 428SCJ 4 speed R-code (owned since 2013)

BayleeStevenson

#3
"Thank you for sharing the information. It is difficult to determine the nut size without special tools, which are quite expensive. However, in addition to this, I have another problem. I tried to tighten a new nut, but it cracked under pressure. What could have caused this? A friend suggests that the problem is with the nut's quality and advises looking into the Scrooz store. I don't have much experience repairing cars, so I asked for help on the forum. If I don't find an answer, I probably should apply so as not to spend money on new parts."