News:

We have implemented a Photo Gallery for hosting images right here on SAACFORUM. Check the How-To in News from HQ

Main Menu

KR Drive Shaft (July Build) balance weights, u-joint originality

Started by Craner, July 10, 2022, 04:06:49 PM

Previous topic - Next topic

Craner

I'm getting ready to send out my drive shaft for restoration.
    -  Replace the tube & restore what I believe to be the original u-joints.

Did Ford typically install the balance weights at a certain distance from the ends?
    - I included photos of my crusty drive shaft assy. 
        - Shows 2 weights at the yoke end, and then 1 weight at the rear end u-joint.

There are still small amounts of the original paint markings.  (Orange, violet)
Originally appears to be correct, based on my knowledge.

Thoughts/Comments appreciated.
Thanks
Fran

Bob Gaines

Quote from: Craner on July 10, 2022, 04:06:49 PM
I'm getting ready to send out my drive shaft for restoration.
    -  Replace the tube & restore what I believe to be the original u-joints.

Did Ford typically install the balance weights at a certain distance from the ends?
    - I included photos of my crusty drive shaft assy. 
        - Shows 2 weights at the yoke end, and then 1 weight at the rear end u-joint.

There are still small amounts of the original paint markings.  (Orange, violet)
Originally appears to be correct, based on my knowledge.

Thoughts/Comments appreciated.
Thanks
Fran
https://www.deadnutson.com/custom-reproduction-driveshaft/   is who everyone who wants one restored like original uses. If you are trying to have your driveshaft re tubed and balanced by someone local chances are the weights will not look like original If you are wanting to save dollars and short cut the original process then the information on his website should come in handy. Best of luck regardless of what you decide.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby