Author Topic: 1967 gt500 pvc hose  (Read 856 times)

Lfino

  • Full Member
  • ***
  • Posts: 103
    • View Profile
1967 gt500 pvc hose
« on: January 08, 2022, 04:23:24 PM »
April car. Not concours correct, but not a Frankenstein either. 427 rather than 428. Shouldn't matter for this question.
Looking for a correct pvc hose from passenger side valve cover breather to bottom of air cleaner assembly.
Do not want to tap into intake.
Seems each nipple is slightly different diameter.
Suggestions please.

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Posts: 6671
  • Original Posts:14706
    • View Profile
Re: 1967 gt500 pvc hose
« Reply #1 on: January 08, 2022, 06:31:23 PM »
April car. Not concours correct, but not a Frankenstein either. 427 rather than 428. Shouldn't matter for this question.
Looking for a correct pvc hose from passenger side valve cover breather to bottom of air cleaner assembly.
Do not want to tap into intake.
Seems each nipple is slightly different diameter.
Suggestions please.
I have a NOS assemblyline correct 67 GT500 PCV hose which may or may not be over kill for what you are doing 185.00 shipped to your door. PM me if the assemblyline hose is what you want. 
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby

Lfino

  • Full Member
  • ***
  • Posts: 103
    • View Profile
Re: 1967 gt500 pvc hose
« Reply #2 on: January 08, 2022, 06:52:47 PM »
Exactly!
Thanks, pm coming.

Carl111

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: 1967 gt500 pvc hose
« Reply #3 on: August 09, 2022, 08:41:15 PM »
Bob, I'm just curious. With the original setup was there an actual PCV Valve or was this just a crankcase vent? If so was it the "usual" valve or something else?
Care to post a picture?
Thank you.

Bob Gaines

  • SAAC Member
  • Hero Member
  • *
  • Posts: 6671
  • Original Posts:14706
    • View Profile
Re: 1967 gt500 pvc hose
« Reply #4 on: August 09, 2022, 09:47:15 PM »
Bob, I'm just curious. With the original setup was there an actual PCV Valve or was this just a crankcase vent? If so was it the "usual" valve or something else?
Care to post a picture?
Thank you.
Same PCV valve EV 42 as a 390 although it was not very effective in the assemblyline configuration.
Bob Gaines,Shelby Enthusiast, Shelby Collector , Shelby Concours judge SAAC,MCA,Mid America Shelby